I'm using a Supermicro SNK-P0064AP3 heatsink to cool an EPYC 7763 on a Supermicro H12SSL-I motherboard. I have several identical machines and have noticed that on one machine the CPU temperature seems to be 10 degrees Celsius warmer than on others. Typically, when idle, this processor on other...
Acquired a Epic 75f3 which will be going in a Supermicro SC846 4U chassis with H12SSL-C and 512GB 3200 RAM.
It's a 280W CPU and choices appear to be somewhat limited and results hard to find re cooling performance.
Dynatron A35 or SNK-P0064AP4
Noise isn't a concern? Does anyone have data showing...
Hi everyone,
I am building an EPYC Gen 2 based system on a Phanteks Enthoo 719 case.
I would like to get your opinion on the best layout and direction of fans to achieve the best possible cooling outcome.
I have 8 X Noctua 140mm fans, 3 at front, 3 at top, 1 at bottom and 1 at the back.
I...
I have an older 16Bay server chassis from Supermicro. I can't find the exact part number, but it looks identical to this: SuperMicro 836BE1C-R1K23B 3U 16-Bay Server SuperChassis
I've gutted this system and replaced the guts with those of my old desktop computer (i7 3770k, Sabretooth Z77, 32GB...
Hi all
Not sure if this should be here, or in Networking, or General Chat.
I'm putting in a proper networking rack now that I'm running ethernet/fibre through my walls, which is going in the top of a cupboard in my second bedroom. The ISP line comes in there, and it is right by the biggest...
Hello all
I've been trying to quieten my supermicro server .. I replaced the stock fan which we very loud with regular PC fans.. that worked.. but I'm concerned about the temps of the CPUs.. I've not tested it too much yet but i'm confident it'll get too hot..
Currently I have passive heat...
Hi - not sure that this is entirely the right forum to place this question/request for help - but here goes.
I bought an HPE ML30 Gen 10 [E-2224 16GB RAM, running WSE 2016] in May, earlier this year. The CPU fan was horribly noisy - so took the plunge and replaced it with a Noctua NH-U9S...
Hello,
I am going to buy Supermicro A+ Server 4124GS-TNR with dual Epyc 7H12 (TDP of each CPU is 280W) and GPUs. I am worry about cooling CPU.According to Supermicro the server has SNK-P0064AP4 heatsink which support CPU with TDP up to 180W (see Supermicro SNK-P0064AP4 4U Active CPU Heat Sink...
I'm considering a 7302p on an Asrock rack ROMED8-2T or Asrock rack EPYCD8-2T motherboard for my new ATX tower workstation for simulation work. The workstation will regularly need to run experiments for 24-48 hours all-core.
Both those boards have a tiny little heatsink on the VRM (see pic)...
I've got a full-length 4U server case, so I've got plenty of room to macgyver it and get any size of fans to work somehow, but I need to both create decent suction to pull air over my hot-swap bays and cool what will probably be a big passive AMD EPYC cooler. I can't seem to find anything to...
Hey STHers!
I'm planning to build my homelab, so I bought a new motherboard Supermicro X10DRL-CT and attempting to use 2 x E5-2690 V3 processors. But problem is I really don't know what CPU cooler should I choose, for family use I have to minimize the noise. I googled to find the answer but no...
Gigabyte G482-Z50
Does anyone know, or could find out (as I think this server is pre-release), exactly how the following Gigabyte HPC server cools its CPUs? (excluding heat sinks)
As you can see there are no front chassis fans, only fans behind the GPUs and at the back of the Chassis; hence my...
I've found a supplier that sells heat sinks which I think will be a better option for the 9361-8i, they are a 26 fin heat sink with a 10mm base and an overall height of 28mm, they are 80mm long and have a width of 31mm, an eyeball comparison shows them looking identical in size but longer than...
Would like to hear your opinion and ideas for NVMe cooling solutions, most obvious is a heatsink I guess.
First of all is it necessary?
The reviews I've read of NVMe's with pre-installed heatsinks, e.g. WD Black SN750, the heatsink didn't seem to make that big a difference in performance (kind...
My 2-port Mellanox ConnectX-2 NIC is running at a scary 72C. I have got a Norco 4u case with 6 Noctua 80mm fans. They are running at adaptive speeds. Nothing blowing air over the PCI cards, so that won't help.
I might build a bracket with magnets to hold some fans (maybe two 80mm) and one of...
I got tired of the noise with my SuperMicro X10 Server (4027GR-TRT), but didn't want to get into involved hardware fan swaps which still may produce unsatisfactory results.
For reference, the "Optimal" fan setting decided to run half of the fans at 8000RPM at idle, and the other half at 5000RPM...
Hello!
I purchased some used Asetek 550LC (they are the OEM for Corsair H55) coolers from ebay and unfortunately they did not come with the long screw / bolts for fitting them to the case. I am looking for a specification for these so that I can pick equivalents from a hardware place or ebay. If...
Hey,
Like I mentioned in another Threat I want my NAS to be as quiet as possible (and of course cool as well).
I already have a be quiet! Dark Power Pro 11 550W PSU and now I need some advices for cooling fans and case - both have to be cool and quiet.
Any ideas ?
Hi everyone,
I saw that some of you had experience with the X7SPE-HF-D525 motherboard and I figured I'd sign up!
I have this motherboard in a 1U short depth SuperMicro rack case sitting inside a wall mounted enclosed rack. Apart from a few random issues, this board has been great for the few...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.