Trying to get them basics straight. This is my first "pro" job where I control everything :cool: Setting up a brand new network for my firms office, 120 square meters, mostly open plan, about 6-8 people in place. The only equipment is a standard Fiberbox and a default ISP modem that can't...
(This request is complete)
Budget: $150 USD
I need someone to walk me through the following:
I am on a residential cable connection (Charter) and have not been able to configure IPv6 properly. I need some troubleshooting help here.
More importantly, I would like to route traffic from an Apple...
Getting rid of some miscellaneous equipment, let me know if you have any questions.
1. Mellanox ConnectX-6 CX653105A single port 100GBE QSFP28 PCIe 3.0 x16 - sold on eBay
2. Two Mellanox ConnectX-4 CX455A single port 100GBE QSFP28 PCIe 3.0 x16 cards with two CWDM4 LC transceivers - sold on...
Dear all,
I have been following the STH Youtube channel for some time, but this is my first post in the Forum. I am currently planning the renovation of the network infrastructure of a local non-profit radio station in Portugal and, since I’m just a student and hobbyist, it would be very...
I want to fool around with 10G networking, so I've been looking for cheap 10G adapters with the lowest possible power consumption. So far the cheapest ones I've found were the HP 530SFP+ and HP NC550SFP. I've read some random posts saying these HP adapters are a nightmare outside of HP servers...
I ran `iperf3` between two Windows machines and noticed that the speeds were not symmetric. I tested using both the built-in 1-gigabit Ethernet adapters in each machine as well as with 10-gigabit Mellanox ConnectX-2 cards in both machines.
Here's the relevant output. I address the 10-gigabit...
I am trying to build out my home network, my goals are high availability and resiliency. I plan to run a Docker Swarm, one docker host on each of my VM servers and one in the DigitalOcean cloud and point all my traffic through a Nginx Proxy Manager on my Docker Swarm. My issue is I have a ton of...
I have a m1000e with some m820 and m620 that are working fine,
each of them have the following network card configured to work on 10gb Ethernet
10 GbE XAUI
Broadcom M57710
i am trying to add newer m630 blades .
but every mazzine network card i try gives an error and the server does not...
Hello,
I got a hold of a few IBM x3650 (7979) 2RU Servers (with 6x 3.5 HDD space).
The servers work perfectly.
The only issue is, the integrated management interface does not work, more accurately the network card gives no sings of life (no lights turn on when the network cable is plugged...
Selling a TZ400 and TZ350 that we replaced with Meraki MXs. Both the TZ400 and TZ350 have lics till Jul 1 2022 . The TZ350 is under warranty till Mar 5 2022 . TZ215 is added as a bonus (no support or lics) All come with power supplies as well.
FS: $750 $299 + shipping + BONUS TZ215
This is my first time attempting networking anything and even after 48 hours of trying to learn new terminology, technology and acronyms i'm still worried about blind buying and ending up with incompatible parts that i'd need to return. I'm a little embarrassed asking such basic questions when a...
Boxed, all original items included. Used for a few months in our office, surplus to requirements.
Full specs here:
https://h20195.www2.hpe.com/v2/default.aspx?cc=nz&lc=en&oid=6783404
Price: £60 SOLD
Hey,
I manage a network at an outdoor restaurant we have a single subnet with a ton of devices. We have occasional gremlins and I am trying to figure out why. It's not terrible, but there's issues with reliability now and then - mostly latency issues (I think) which usually get noticed when...
My Freenas server is not detecting my new (from ebay) SFP+ card. It is the Mellanox ConnectX3 MCX341A-XCE, but I haven't been able to find an updated firmware for it anywhere. If I try the other firmware's for other variations of the card, I get this error -E- PSID mismatch. The PSID on flash...
I recently upgraded my network to 10gb, but I can't get my TrueNAS rig to recognize it.
This is the ebay listing for the product I bought: https://www.ebay.ca/itm/2PCS-MCX341...3?pageci=80ea2655-f689-46eb-adcd-183105ef37f2
Both cards are tested and working in my PC (Windows) and my Dell R710...
as above.
due to cabling constraints, my server can only connect to the internet via WiFi (currently an Intel 8260AC).
- Can I use my current setup to setup ESXi 6.x/7.x (not the workstation edition)
- OR maybe I need something like this? (DAP‑1522 - Xtreme N Duo Wireless N Access Point)
I'll...
Hi,
In a few months I'll be moving to a new house and it's time to start planning the network layout/topology.
The current state and equipment (nothing fancy):
Hardware - all located in one single room (wired):
Media Converter
APU - pfsense
NAS - Freenas
AP - Unifi LR AP
Switch - MikroTik...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.