Hi,
I own a DL360E from HP with a P420 raid but I would like to change it due to extremely low or fluctuating speeds. I would like to buy a H220 but I don’t know whether is possibile to boot from this card because when I tried to put the P420 in HBA mode it wasn’t able to boot from the disks. Is...
I'm planning on getting some new drives soon, and after checking what I have I found out I need a new HBA. My current card is a "HP SAS 3801E" (Only sas1, so max 2tb drives) and the one I'm looking to upgrade to is a "LSI SAS9207-8E" (seems to be the card people recommend for sas2?)
My current...
So I bought a hp dl380e gen 8 and only 4 of the bays work, so I need an add-in card.
The one officially recommended is this https://www.ebay.co.uk/itm/HP-631670-B21-Smart-Array-P420-1GB-FBWC-DL380e-Gen-8-12-14-LFF-Kit-/143298056050?hash=item215d3acf72 1
I’m pretty sure that one would not work...
Hi,
i have recently acquired a new DL360e with a P420 raid controller. I have installed one 120gb ssd (consumer) and set up RAID 0. When i booted into the os (Vmware) and created a vm i noticed that it was running very slowly and the disk speed test (CrystalDiskMark) reported read speeds of...
I recently discovered that Supermicro has a PCIe PLX switch HBA card that supports 8 downstream devices via OCuLink, and that it's been out for maybe a year now.
AOC-SLG3-8E2P | Add-on Cards | Accessories | Products - Super Micro Computer, Inc.
Does anybody have any experience with this beast...
Hi everyone,
I recently received an LSI SAS9207-8e from ebay and installed it into my PC (windows 10, v.1903).
The card does not seem to be even recognized by the system. In device manager -> storage controllers it does not appear at all.
- the card is getting (very) hot, so it is being powered...
Hi everyone,
I will attempt to build a DIY DAS enclosure and among the components I am looking at is the
Norco C-8087-8088F.
I have a few questions:
1. This does not seem to require any external power. Is it practically 2 male>female adapters glued to each other?
2. In the host side (my PC) I...
Hi, I have a few HBAs for sale, all are brand new sealed in original boxes.
5x Broadcom(LSI) MegaRAID SAS 9305-16i Broadcom link - 210€/card
5x Broadcom(LSI) MegaRAID SAS 9305-24i Broadcom link - 290€/card
5x Broadcom(LSI) MegaRAID SAS 9361-16i Broadcom link - 480€/card
5x Broadcom(LSI) HBA...
Hi folks, i'm looking to get hba card that could be used with breakout sata cable, either sff 8087 / 8088 to sata.
And it must also be able to be able to hit 6Gbps, cause ive read some dell card only hits 3Gbps for each drive.. Trim capability would be nice too
Any recommendations?
Edit : 8463...
I would like to flash my M5015 to IT mode so I can use it in my freenas machine. I don't have a probable with using the flash tools and I have found guides for it, I just couldn't find recent reliable information about which exact files I need to flash. I found several guides from ~5 years ago...
I'm looking to upgrade my server a little bit and add on a DAS enclosure but I'm having some issues getting everything planned out before I buy stuff as I'm somewhat new to using RAID controllers and HBA cards. I'm planning on getting a rackmounted Rosewill case with hot swap bays to hold my...
Hello there,
I would like to use the following setup: Hitachi DF-F800-RKAKS with Enclosure Control Unit model: Y1KAS (p/n 3282443-A) connected to a Windows 2012 server (HP DL360e Gen 8) with SAS9207-8e (IT mode) using a K1BS cable (p/n 3276137-A) and I don’t get any progress. During the post...
Hi. I have been searching and searching for help all over. and still have no running server as of yet.
here is my problem(s)
I bought a SuperMicro X8DT3-LN4F Motherboard to upgrade my oldish Opteron based server.
I run a Prxmox VE with 5 or 6 LXC containers for File serving and Media storage...
I've been lucky enough to obtain 6x800GB SSD drives which I will be adding to my ESXi home server but I'm a bit lost as to what add on card I should really get so that I can successfully pass through the card to a CentOS host running a BTRFS raid setup (which then hosts an NFS export for further...
Hello,
I just got my SA120, and finished my VM host build for the most part. I'm missing some Intel DC SSDs (going for 3710, and 3700, but I want to find out if 3610s are OK for VM storage, I will explain in another thread most likely) and the HBAs and RAID card.
My SA120 comes with two PSUs...
I would like to add SATA3 to a X8DTL-iF MB that unfortunately only supports PCIe 2, and has no controller for SATA3. The reason is leveraging SSDs. I might consider ditching the MB but I keep it because the two Westmere CPUs in it were bought at retail prices years back, and they are perfectly...
Hi there,
with the black friday discount i bought two crucial mx300 525GB and until now i used them as spare drives for random files in my home because i was waiting for a DELL H200 IT mode HBA card.
I finally had the opportunity to test them this week but the results are a bit disappointing...
Hi,
i have one IBM SERVERAID M1115 SAS (using tape to cover B5/B6) controller that's not detecting any disks after connecting it to my backplace, an SM 826A. I'm now using direct SFF8087-SFF8087 cable i bought from ebay/China. I was able to get into it's BIOS, but no disks are listed there...
I recently purchased a SAS HBA (over here in great deals) LSI Sas 9201-16e
And I'm loving it so far it's quick and flexible and I have a few external ports left after looping it back into my tower for the ones I need. I've been toying with using some of the old cases I have to build an external...
Hello,
I have a Chelsio S320E 110-1082-31 dual port 10GBps PCI-E FC HBA. I am currently working on setting up a 40GBps lab, so cleaning out some older hardware. (Many RAID cards coming soon)!
$50 +actual shipping (I'll throw in a gift!)
$50 +actual shipping (I'll throw in a gift!)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.