sata

This was originally posted at r/homelabsales but also posting here I have a Supermicro X9DRi-F board, dual E5-2670 V2's and 32GB RAM for sale. Everything is in good, working condition....just need to clear out excess parts. The board comes with SAS breakout cables, IO shield and one SATA cable...

As mentioned in the title, I messed up and broke my brand new Seagate Ironwolf 10TB sata port during installation. I blame cable management but in the end, I'm the one who did that as well so I can only blame myself. :) I originally posted this on LTT forums a few weeks ago and I figured I'd...

Selling a (cold spare) drive that has been sitting on the shelf for going on 1 year. We are moving to larger 16TB drives, so my raid is being set to our test environment. (Might post the old old raid 4-8TB drives soon or the whole ESXi server). The drive was used in the original setup and may...

Hi, so I bought an R710 a while back, and for some reason the drives were not recognised by the raid controller. Initially I had an M1015, but swapped it out for an H700 when the drives didn't work. (The seller thought the H700 would work with the drives). The drives are 4Kn (HP...

Sorry for the post, been utterly confusing myself of late and it's for cable/card types i've never used before, so i'd like someone to check this will likely work :) Case i've ordered is the Silverstone CS381 chassis. With my old PC's AMD B350 + 1700 CPU + 32GB RAM combo in it as my new NAS/VM...

Hi, I've been googling this question for a few hours now...and just can't seem to find a straightforward answer. I have several IBM branded drives... I believe they're all Seagates... ST3000NM0033 - SATA ST4000NM0033 x 2 - SATA ST6000NM0014 - SAS All running on a Supermicro server. Does...

Hy! I bought this cable https://www.amazon.de/gp/product/B013G4FEGG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 and i connected to my Supermicro X9DRi-LN4F+ SFF8087 port. I plugged the cable other end to the HDD-s and they won't spin up. I tried to cover PIN3 on the hdd, still the same...

A vendor in Poland is selling Rackable half-depth chassis with 12 LFF bays Newer version (Dual Socket F, plastic drive trays, 3 chassis fans, Mini-SAS connectors on backplane) Older version (Dual Socket 940, metal drive trays, 2 chassis fans, SATA connectors on backplane) Both versions...

I'm attempting to add a single 256GB SSD drive as my server system and OS drive. I intend to install WSE 2019 with 4x1TB HDD's in RAID 0 in the existing 4 bay drive cage. Two things I have noticed is that there is a spare unused SATA connector on the MB, but no available power cable. There is...

Hello and Happy New Year to Everyone, I'm going to put my hands on supermicro hardware to make a virtualization server, and I have a question regarding proper using it for ZFS. So first the hardware: motherboard: X9DRH-7TF Supermicro | Products | Motherboards | Xeon® Boards | X9DRH-7TF it...

Hi. Forgive the newbie question! I have an 8 x 12TB disk Zfs RAID0 array running on the motherboard's SATA connectors on an AMD X399 motherboard. Read speeds top out at about 800 MB/sec. This is slower than I expected. Each disk can sustain over 200 MB/sec so the RAID0 array should, in theory...

Just thought I'd share a new piece of tech I found while doing my weekly browse on AliExpress. I was quite intrigued when I found a PCIe to 5x M.2 SATA3 adaptor for $59.00. Link: US $59.0 |JEYI JMS585 X16 PCIE 5 m. 2 SATA expansion card turn PCIE3.0 SATA RAID array card 5*ssd 5*ngff 5*m.2...

Hi all, I cleared this with the admin. Below is the intro and sale information. Our business, Tekram USA has been in the data storage/controller/RAID industry for over 20 years. Our main products are controller cards and Thunderbolt 3/Type C RAID enclosures. We've built a good reputation with a...

i have these four 36GB WD 10k Raptors from back in the day and im not sure of what to use them for? are they only good for their magnets nowadays? are they sellable?

Alright, time for a stupid question - so right now I have 4x4TB HGST Deskstar NAS drives on a raidz1 setup (in a MicroServer G7 N40L via FreeNAS), and I realized that maybe I should've slapped an extra 4TB up top and ran it on raidz2, my guess is that it might be a little too late for that one...

Hi. I have a bunch of those 5.25" to 3.5" SATA SAS HDD Hard Drive Cage Adapter Tray Caddy Rack Bracket For 3x 5.25" CD ROM Slot Internal or External PC DIY-in Computer Cables & Connectors from Computer & Office on Aliexpress.com | Alibaba Group in my storage servers. They are cheap, they work...

Hello, I have recently bought an Intel H2312JFJR node system and having problems with the drive speed. This system is supposed to support 6Gb/s SATA speeds but I can't get it configured this way, it always peaks at 3Gb/s. The ssd drives I'm using are Samsung 850 Pro and the installed OS is...

I have two IBM M1015's available $45USD each. Can supply SFF-8087 to 4xSata fan out cables additional $5 USD each. Purchaser also pays for shipping - the cost of which will be dependent on what shipping option they choose.

Hi all Firstly, this is possibly a motherboard problem so it might belong in the mobo forum; but my symptoms relate only to disks and HBAs, so I hope it's OK being here. I have a Tyan S7012 motherboard, LGA1366 chipset. This motherboard has 4 x PCI-E 2.0 x8 slots and 1 x PCI-E 1.1 x4 slot...

Apologies if this turns out to be an FAQ, but I did go back at least six months in this forum and saw the MD1000 discussed: Dell MD1000 with non Dell hard drive, is it work? The PSU in my SE3016 died during a power outage a few months ago (swapped in an old HP MSA60 @ 1.5Gbps). Replacing the...