chassis

I want to build out a growable NAS using ZFS. I'm a bit confused about the chassis options when looking for chassis with a large number of drive bays. I have seen, on this forum and others, discussion about the supermicro chassis. However, when looking on ebay, I see that these often, but not...

PRICING I've tried to price as fair as possibly, via perusing the deals threads and looking at current ebay offerings in addition to completed ebay sales. Should you feel as though a price may be too high, etc., please don't hesitate to PM me to let me know so I can review and action...

So I'd like to dip my toes into the world of machine learning. I have most of STH's Starter ML build already as my home server. Except for the GPU, and also, it's in a 2U rackmount chassis. Specifically, the Supermicro SC825TQ-536LPB; the "LPB" part of the model name stands for "low-profile...

The title may not be fully correct, but basically what I'm trying to find is another vendor similar to Supermicro that produces chassis for DIY type builds. I'm looking at adding 2.5" JBOD storage to my existing home file server, and while this might sound dumb, the way something looks has some...

Have a chassis with the narrower set of inner rails, tool-less, snap-in, made by Repon but no part number, looks to be similar to a Rev B set of inner rails. They came included with a 847E1-R1400UB chassis. The inner rails are looking for their forever match- a pair of left and right outer...

Hello! I purchased some used Asetek 550LC (they are the OEM for Corsair H55) coolers from ebay and unfortunately they did not come with the long screw / bolts for fitting them to the case. I am looking for a specification for these so that I can pick equivalents from a hardware place or ebay. If...

Supermicro CSE846 SAS 2 2 PWS-920P SQ PSU All sleds includes NO Rails included $564 Shipped

I've created a list of common Supermicro chassis part#s -- rear windows, cables etc. For example there are at least 5 different Front control cable 20P, 16P single, split, different lengths etc. Many of the parts are interchangeable between different chassis. Hope this helps someone save some...

Looking for a chassis that I can work in for a DIY JBOD DAS... in Europe (UK is OK too though I prefer EUR shops because of the rates). It must be short depth since I have maximum 47cm between posts front/back in my cabinet. 2U, 3U is fine.

Hi Guys, I have a 4U chassis with 24 bays for 3.5" drives currently, but it is short depth at only 550mm. With the hardware raid controller and SAS expander I have, the area for the mobo is pretty cramped, and I am thinking of offloading the compute part of the machine to a seperate chassis...

My current build: SuperMicro X9DRL-IF (ATX Form Factor) 2x Xeon 2660 Ubuntu Server 16.04.2 3x8TB 6x6TB (I also have a spare 6x3TB I want to use again) This is stuffed into a full ATX tower with no more room to grow. Every 3-4 months I'm hoping to add 3x8TB to the build. This build has...

Hello, I am looking for a chassis with 11x expansion slots to fit my Supermicro X10DRG- q motherboard. Currently I only found the following. I would like to use this thread to build a database of the 11X expansion slots chassis. In the future people can refer to this thread when they have such...

I've seen a lot of 2U semi-hot-swap chassis with 24-ish drives mounted vertically across the front. That's nice and all. But they're usually optimized for those bulky spinning-rust 12.5mm drives, and they're only semi-hot-swap because you have to: Pop the drive out unscrew the old drive screw...

I currently have a RPC-4224 with some failed backplanes. I've tried calling and emailing Norco and have received NO response. So I'm looking for an alternative. I'm looking for a cost effective solution to house my 24 3TB SATA drives. I appreciate any suggestions you can give. Thanks

Won't take a genius to figure out that Supermicro chassis are a pretty good fit for this list, but let me know what you guys have and how much shipped to Seattle, WA (or if available for pickup if local). Something like a Supermicro SC829, 827, 826 or 825 would fit the bill pretty well...

I am considering to buy either RSV-L4500 or RSV-L4000 for a silent, rackable workstation build. I am looking for maximum height cleareance inside the case but find anectodal and contradictory information only - can anyone point me in the right direction? I intend to put a 158.7 mm heatsink...