Hey everyone,
Need a quick sanity check, or maybe a math check:
Which would be more cost effective platform for a SOHO SSD NAS/SAN attached to a 10G/40G switch via a Mellanox CX3: a used Broadwell platform with PCIe Gen3 drives (e.g. Intel P4510 or 905p, or Samsung 970 Evo Plus); or a used...
Hi there, I wonder if I am lucky enough if any of you can dump a screenshot of HWInfo on a Xeon 6130H? Specifically on those turbo boost multipliers!
The only diff I can find on the Internet is the all-core frequency for 6130H claims to be 3.1GHz whereas normal 6130 is just 2.8GHz.
I would like...
Hi people,
I am asking this question on someone's behalf, but are there any places still offering and have supply of the Supermicro SYS-5038K-i-NF1?
I am aware that the Xeon Phi product line was discontinued last year, but I just want to be sure I've consulted enough reliable information...
Hello,
I pulled the Internals out of two old Dell 19" Servers to use the Cases.
Now I have two SuperMicro X8DTH-IF-BM003 Boards with one CPU and 3*2GB regECC each.
I have the Coolers, but although they have different Screws than the newer Sockets I'd prefer to keep them.
(They are still...
Do you need a lot of space to attach drives? Do you live in the Seattle area? Then this is for you!
This chassis and motherboard combo would make an awesome home NAS with massive expansion capabilities, you know, for all those Linux ISOs and/or Chia ;)
The Chenbro NR40700 includes the following...
Selling a previous build I used for unraid. Comes with the following:
Server case (Do not remember the model, think it is a Rosewill) and keys to lock
All disk trays (10x 3.5", 4x 2.5" - I do not have the keys for the two lockable 3.5" but the trays are unlocked)
EVGA 850 GQ Gold Power Supply...
Selling a Supermicro server in a CSE113-M chassis with ...
Supermicro X10SLM-F motherboard
Intel Xeon E3-1270v3 with 3.5Ghz
Active CPU cooler
32GB ECC Udimm RAM (4x8GB Samsung)
LSI 9217-i8 SAS2 controller (flashed IT mode) for 8x 2.5" SAS/SATA hard disks (HDD/SSD) with respective cables (data)...
Hey there,
I am currently looking to get a new home NAS together with the potential to run a very few, lightweight VMs on it as well. I am currently ping-ponging a bit back and forth between what I want and what I need (a xeon-d 1541 would probably/realistically be good enough) but if someone...
I have an Supermicro X10SRL-F and whenever I try to boot with my e5-2680v4 it starts up and then randomly during the boot process turns off. It happens at random points during the boot process. I have also tried with a 4-core v3 processor and it works fine. The v4 also is not being detected in...
I got two of these pulled from an abandoned HP DL380G9 (was a testserver). (So no ES samples)
Price each 300€.
Have not placed it yet on ebay.
Did place it though on a few local Belgian sites. But there is only a small community for Pro stuff, so not much interest.
So I thought about posting...
Looking to get rid of this soon as.
This is pretty much a perfect FreeNAS file server and has been serving as such reliably in my homelab.
Consists of a SC836 case from circa 2008 or so which had everything overhauled a few years back with 4 PIN PWM SuperQuiet fans (FAN-0104L4), a SuperQuiet...
I've been thinking about this for a while now:
There are these E5-2603 (and their newer v2-4 predecessors) low end CPUs all over ebay for (sometimes) single digit prices. They aren't fast, nor do they pack any special features other than being cheap (even new they where dirt cheap compared to...
I have 4 intel xeon 8890 v3s for sale. We have 3 rigs like this and got a good price for 8 and we only needed only 4 so im selling the other 4.
Im shipping from serbia,I can ship with regular mail from here which is cheaper but calculated by country and I can ship with fedex which is a lot more...
When I was browsing the internet, I found the first retail motherboard for Icelake xeon.
This mobo supports LGA4189 and 8ch DDR4 3200 Rams.
CPU supports PCI4.0.
MAX TDP of CPU seems to be 270W.
Is it time to get Icelake Xeon?
I'm excited about this and 2nd gen optane ssd.
This was originally posted at r/homelabsales but also posting here
I have a Supermicro X9DRi-F board, dual E5-2670 V2's and 32GB RAM for sale. Everything is in good, working condition....just need to clear out excess parts. The board comes with SAS breakout cables, IO shield and one SATA cable...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.