Hello,
I am going to buy Supermicro A+ Server 4124GS-TNR with dual Epyc 7H12 (TDP of each CPU is 280W) and GPUs. I am worry about cooling CPU.According to Supermicro the server has SNK-P0064AP4 heatsink which support CPU with TDP up to 180W (see Supermicro SNK-P0064AP4 4U Active CPU Heat Sink...
Selling a used Supermicro server 5028a-tn4. This has had a warranty replacement motherboard. Apparently the early atom boards had a flaw with the cpu.
This was barely used - it sat in my friends garage powered off for most of the last few years. He expected to use it but didn’t and gave it...
I have a Supermicro C2758 running PFSense as my main router, on gigabit fiber with an OpenVPN server. It's been freaking amazing since I deployed it and I just assumed I could keep it going forever. I was totally out of the loop on all the discussions of the Atom C2000 AVR54 bug that renders...
Does anyone know if the backplane (BPN-SAS-827HD) in the SuperServer 6026TT-HDTRF (2U, 12-bay LFF, 2-node) can be replaced with a backplane (BPN-SAS-826A) for the CSE-826 chassis?
The Twin backplane uses proprietary connections to connect 6 drives to each motherboard. I'd prefer SFF-8087 ports...
I've had my dl360p G8 a little while now, probably about a year.
ESXi 6.5 U3
2x Xeon E5-2630v2
48 GB RAM
4x 600GB 2.5" SAS HDD
2x 750w PSU
Over the course of the year I've realised that whilst I really like this piece of kit, it's just too loud(whiiiiirrrrrrrrR) and power hungry (last months...
Hi all,
I am looking for a lower end Supermicro Xeon D based motherboard for a dedicated file serving only FreeNAS server. Also interested in memory and potentially a SYS-5029A-2TN4 Mini Tower chassis. I have previously used a Xeon D 1541 but it was definitely overkill for the task. If anyone...
I have acquired a like new Supermicro 12 bay server. It was originally built to be a Pivot3 CloudBank. I installed XigmaNAS to test it out. I think it has less than 40 hours of use. It uses the CSE-826 chassis and X8DT3-LN4 mainboard with the SAS-826EL1 backplane to support 12 drives. Has 2...
Hi guys,
before I start getting completely off-track, i wanted to ask you for advice regarding the placement of SFF disks in my Supermicro 6028U-TR4+ Server, based on the CSE829U chassis.
My current plan is to have the 12 LFF front ports conencted to an HBA, which is then passed to a VM for...
I'm selling my Supermicro SYS-5028D-TN4T. It works perfectly, comes with all drive caddys and has the remote BIOS update key. No RAM or drives included.
Asking $900 OBO + $50 shipping to lower 48. Paypal only
Please help... I have a Supermicro X11SCA-F running ESXi 6.7 update 3. The BMC is set for fan mode "full" (which was then followed by a cold start of the BMC). I've got impitool installed and I can control the Noctua fan noise and thresholds with the following script:
# Supermicro X11SCA-F fan...
Hello!
I've been thinking of replacing my old (and trusty) Intel Pentium J2900 server with something more powerful. After some thinking I finally decided to use an E-2200 series Xeon. This is the build that I'm planning on getting:
CPU - Intel® Xeon® E-2226G (x1)
MOBO - Supermicro X11SCH-F (x1)...
Hi Guys,
Any input would be greatly appreciated.
I'm trying to build out a storage server using a Supermicro 2U 24 Bay Chassis (SAS3 12Gbps Backplane) connected to 3 x HBA cards ( AOC-S3008L-L8e ) to provide iSCSI storage to either proxmox or hyper-v over 10Gbps ethernet.
I would like to...
Supermicro finally announced several H12 generation ATX boards for EPYC Rome:
H12SSL-i | Motherboards | Super Micro Computer, Inc.
H12SSL-C | Motherboards | Super Micro Computer, Inc.
H12SSL-NT | Motherboards | Super Micro Computer, Inc.
H12SSL-CT | Motherboards | Super Micro Computer, Inc.
5...
Hi,
I just grabbed a cool server for pfSense with a X9SCI-LN4F Supermicro board and a E3-1230 v2. Everything seems to be fine except for the fans. They sound all like rubbing sandpaper and they are almost EOL and have their dead-end very close. The fans currently installed are SUNON...
Supermicro X10-SDV-F with 8-core Xeon and extra cooler
I'm offering my barely used Supermicro X10-SDV-F with an 8-core Xeon and I'm asking for :
385.00 EUR incl. shipping in the EU (European Union)
Shipping will be insured up to 500.00 EUR
Payment via PayPal or Revolut bank transfer only
For...
I have an LSI 9207-8i card (2 ports) connected to an expander (Supermicro SAS-216EL, 3 ports) via a single mini-SAS cable, which is connected to a 24-drive backplane (Supermicro BPN-SAS-216EB, able to hold a 2nd expander). There should eventually be 24 SATA3 SSDs connected to this backplane...
Hey STHers!
I'm planning to build my homelab, so I bought a new motherboard Supermicro X10DRL-CT and attempting to use 2 x E5-2690 V3 processors. But problem is I really don't know what CPU cooler should I choose, for family use I have to minimize the noise. I googled to find the answer but no...
Recently, I got some resource to get some xeon d-1581 and then want to do little surgey on my x10sdv-tln4f.
By pass the process, the result make's me quite happy. Maybe it's the first artificial x10sdv-16c-tln4f? ^_^
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.