supermicro

So I have two Supermicro servers, a 1U and a 4U. I just want to reduce the noise a bit. It's mostly the fan wall that is in them. Ideally I'd like to replace them with a quiet fan like Noctuas. I'm not worried about the power supplies at the moment, it's mainly the fan walls I want to get...

Hello, my MB is a Supermicro X10SL7-F, that has a onboard Lsi controller, that I have in IT mode. I think it is 2 different controllers and I'm planing on installing proxmox on this server, but I would like to use it with truenas. Will I be able to passthrough the onboard LSI controller? Or that...

I recently upgraded an X9SRH motherboard to BMC version 3.61, I got the green screen (missing red color) and extremely slow delay. Installing CentOS over the BMC was a really awful experience. I see that I have an older BMC firmware for another X9 motherboard on my file system, can I downgrade...

Hello guys! Since i have some thing's to sell that i no longer use/need i will be listing em here for in my opinion reasonable prices: Shipping prices can be lower but keep in mind shipping speed will suffer as well 1.Laptop: Dell g5 15 5525 Phantom grey 120hz Received it as a gift for my...

I'm building a new TrueNAS box with the following: *AMD Epyc 7313P 16C/32T SP3 *Supermicro H12SSLiO motherboard *256gb 2133 DDR4 RDIMM - Hynix The issue I'm having is an odd one. The box hates to warm reset. If I try to "save and reset" from BIOS or restart from a live linux drive it hangs on...

I never work with server build previously . So I have little confusion about the combability issues. Can I use multiple Nvidia Tesla GPUS like P40, p100 or v100 with Supermicro H11SSL-I along with AMD EPYC 7551P CPU . Motherboard spec H11SSL-i | Motherboards | Super Micro Computer, Inc. It...

Say you have a single SMicro host (single node) with LSI 9300 + 8x SSds. (ESXi is installed on a separate disk). How do you "pool" the storage to make a large datastore?

Sold !

Hi I messed up my LOM Intel i350 EEPROM on this board. Can someone with the same exact motherboard (X9DRW-3LN4F+) make a dump with "sudo ethtool -e eno1 raw on > eeprom1.bin" for me? (same for eno2-eno4). On my board it was v1.61 for the first two Interfaces and v1.52 for ethernet port 3 and...

Hi All! A green hand here. I bought an OEM H12SSL-I to set up my first server. It was working fine until some meddling with the bios. Result? It cannot boot up and stays at "bmc initiating" forever! Now, I can't enter bios or ipmi console no matter how I tried. Any advise to make it work again?

Hello, I'm looking for a motherboard for a Rome/Milan EPYC, single or dual socket. E.g., Asrock Rack ROMED8-2T, Supermicro H12SSL, Gigabyte MZ32-AR0 for a single socket or Asrock Rack ROME2D16-2T, Supermicro H12DSI, Gigabyte MZ72-HB0 for dual socket, or similar. Thanks.

We got two Supermicro servers that can't boot from USB flash drive (stick), nor DVD. I can se the ring of dots rotateting a few laps then when you supposed to se the windows installation interface, the screen goes black. In my machine is the x9dai motherboard and the other Wich is a couple of...

I have a Intel Xeon E3-1245-v6, which has integrated graphics but the Motherboard Supermicro X11SSL-CF always picks up only the ASPEED graphics instead of the Intel one. I saw some blogs which told to choose IGFX in BIOS but I don't see that option. I have attached a screenshot. Is it even...

Hello, I have a Supermicro 7039A-i workstation. Motherboard is an X11DAi-N. Running an Intel Xeon Silver 4114. 64MB RAM via 4 Crucial 16GB DIMMs. No video card (using onboard video). Primary drive is a Samsung EVO 860 SATA SSD. Also using a Samsung EVO 970 M.2 SSD and a Western Digital...

Interested to see if anyone has one of these chassis available w/ the following: SAS3 backplane All 24 drive trays Rails Would be looking to get it shipped or within reasonable drive for local pickup of 60502. Thanks!

I hope this is the right forum to ask this question, I'm not sure. I am in the process of buying a CSE-846 chassis w/ drive trays only and BPN-SAS2-846EL1 backplane for $300. I am potentially interested in upgrading the backplane to BPN-SAS3-846EL1 for the right price as the seller can pull...

Motherboard Supermicro X11SCH-F. BIOS and BMC Firmware latest: Firmware Revision: 01.73.12 Firmware Build Time: 05/10/2021 BIOS Version: 1.6 BIOS Build Time: 05/25/2021 There is a problem with this motherboard. Remote control via BMC stops working if you do BIOS settings. After saving the BIOS...

All hardware is in perfect working order and has been tested fully prior to selling. All items shipped via insured next day delivery. Will ship outside UK, but you may need to pay import charges. All serial numbers will be noted down and boxes recorded being packed for both our protections...

Hi all, I have a Supermicro E300-4CN8TF that needs a new home. It's been rocking ESXi 6.7 (But is capable of 7.0) and doing stellar service for the last few months. But I don't need two of these. So give it a new home - Run PFSense, OPNSense, VMs, Dockers etc. It's got SFP+ / 10Gbe / 4xGbE -...

Hi All, we buy SuperStoreSystem 6048R-DE2CR24L ( a high-end Super Storage Bridge Bay (SBB) system comprised of two main subsystems ), when we power on two node and go to raid utility (ctrl + C in system boot) , one Node show all disks , but another node dony any show disks in raid utility...