I have read many post on STH but it's my first time creating an account (due to the reddit blackout) so hopefully this is in the right section, if not my apologies.
So I made a mistake in buying an Epyc on ebay from china before realizing that they have the performance throttled due to...
I have a Supermicro H12SSL-i motherboard with an ESXI system installed on it. Recently, I want to pass through the hard disk to the virtual machine through the sata controller to the virtual machine.
When I opened up the ESXI PCI device passthrough page to try to passthrough a sata controller...
I am close to buying a used SuperMicro H11SSL-i motherboard. The motherboard is rev 1.0 and will have an EPYC 7551P CPU installed.
I have noticed there are revision 2.0 of these boards available for sale, so I started wondering. Am I better finding a revision 2.0 board, or am I better going...
I have a Supermicro H11SSL-i motherboard and it has the interfaces below. I have tried doing research on the use of these interfaces and the cables I might use. But I have come up empty? Any suggestions greatly appreciated.
Recently purchased a used Supermicro H11SSL-i motherboard. Only issue... it didn't come with the nylon mounting clips to retain the M.2 drive in place.
Unfortunately Supermicro doesn't sell spare parts to us folks in the great land down under, so I am looking for some suggestions on possible...
Possibly a stupid question, but I am looking to put together a supermicro server here soon and am looking at a case listing that does not come with trays. It looks like there are a lot of different part numbers for 3.5" trays from supermicro, are they all the interchangeable?
I would like to set up a server for AI/inference. Already have some GPUs. An RX580 and a P40. I couldn't get the P40 running in any of my other systems due to incompatibility. I will eventually get more GPU as my budget allows. They will be high vram GPUs like more P40s or 3090, etc.
I was set...
Hello,
I am trying to access IPMI console of a server through jump server. The jump server has Java 11 installed on it. I can use remote console for most of them without problem but for few I cannot and it says Browser has no java....I read somewhere that they stopped using installation of java...
So I ordered a couple of these: AMD epyc 2U active SP3 TR4 4 heat pipe CPU radiator Ⅹ 399 H11DSi | eBay
One came missing a bolt. Any insight on how I might most quickly be able to replace it? I have an LGA2011-3 heatsink here but I am guessing the bolt threads/diameter/spring tension aren't...
Hello every one. And today I am need your help. May be some one knows how I can check S.M.A.R.T. my disk on this motherboard? My operation system is Windows Server 2008 r2. I know what this old version of motherboard and operation system, but she is work very well and I want to upgrade her work...
Hello,
I have been trying to get the RTX2070 to work on my server. No luck so far. Graphics card doesn't show on lspci.
I have a clean install of Proxmox on spare ssd for testing purposes. UEFI boot is enabled. Tested also with Ubuntu live.
Specs:
-Supermicro X9SRL-F (currently latest BIOS...
Proof:
I present to you, the beast! I am downsizing with my 2nd child on the way. This has been lightly used in a homelab environment, running 24/7 for the past ~2 years. The noise is surprisingly good with this having all aftermarket fans and quiet PSU. Still gets good static pressure. I had...
Hey guys,
I got something weird while trying to setup IPMI on a Supermicro board. The settings are not accessible in the BIOS (see picture) and I had to use EFI Shell and IPMICFG to manually setup an IP.
I've tried upgrading to the latest version of the BIOS and IPMI firmware but no luck...
I am coming up on the time to build my last piece to complete my rack. I have a dedicated TrueNAS server for storage, and a firewall. I want to have a dedicated machine for (likely Proxmox) to self-host everything on, and for Jellyfin (which will run in Proxmox).
I am gathering suggestions. I am...
So I have two Supermicro servers, a 1U and a 4U.
I just want to reduce the noise a bit. It's mostly the fan wall that is in them.
Ideally I'd like to replace them with a quiet fan like Noctuas. I'm not worried about the power supplies at the moment, it's mainly the fan walls I want to get...
Hello, my MB is a Supermicro X10SL7-F, that has a onboard Lsi controller, that I have in IT mode. I think it is 2 different controllers and I'm planing on installing proxmox on this server, but I would like to use it with truenas. Will I be able to passthrough the onboard LSI controller? Or that...
I recently upgraded an X9SRH motherboard to BMC version 3.61, I got the green screen (missing red color) and extremely slow delay. Installing CentOS over the BMC was a really awful experience.
I see that I have an older BMC firmware for another X9 motherboard on my file system, can I downgrade...
Hello guys!
Since i have some thing's to sell that i no longer use/need i will be listing em here for in my opinion reasonable prices:
Shipping prices can be lower but keep in mind shipping speed will suffer as well
1.Laptop: Dell g5 15 5525 Phantom grey 120hz
Received it as a gift for my...
I'm building a new TrueNAS box with the following:
*AMD Epyc 7313P 16C/32T SP3
*Supermicro H12SSLiO motherboard
*256gb 2133 DDR4 RDIMM - Hynix
The issue I'm having is an odd one. The box hates to warm reset. If I try to "save and reset" from BIOS or restart from a live linux drive it hangs on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.