epyc

here's the question, and maybe it's obvious to some of you. i've got a 2U SuperMicro server with their SAS3 expander built-in. i installed an old stinky H11SSW-iN from ebay on it. (if you sold it to me, thanks!). no matter how I connect the cables, the motherboard (running a stinky old 7551P)...

Managed to get two 7742 at a decent price. The issue is these are Dell, not the retail version. Couldn't find a solution, online, except getting a Dell system board. Anyone managed to make these work on a Supermicro/Asrock/Gigabyte motherboard?

I have a GIGABYTE MZ31-AR0 rev 1.1 and I figure the only diffrence between the revisions of the board is the size of the SOP8 flash for the bigger BIOS. I bought some MX25L25645 flash chips to replace the original one and just... flash the revision 2 or 3 BIOS onto it to make Rome or even Milan...

Good afternoon, I am planning on putting together a new, low core EPYC system (I need the PCIe lanes more than the cores) and I am currently contemplating whether I should go with another ASRock Rack board, the ROMED8-2T, or one of the Supermicro H12SSL-* ones (probably the -I as I have a spare...

Good afternoon, was originally looking for an EPYC CPU + Ram, but I did get one of the CPUs for a somewhat reasonable price and now looking for RAM, ideally (= I am using them successfully in other systems) either Hynix HMA84GR7DJR4N-XN or Micron MTA36ASF4G72PZ-3G2 ones. If anyone has some to...

Hey everyone, Need a quick sanity check, or maybe a math check: Which would be more cost effective platform for a SOHO SSD NAS/SAN attached to a 10G/40G switch via a Mellanox CX3: a used Broadwell platform with PCIe Gen3 drives (e.g. Intel P4510 or 905p, or Samsung 970 Evo Plus); or a used...

Sold

I finally received my order from Shopblt for the 7443P. I still have it in the box and have decided to sell. The cost including all fees and expedited fedex shipping is $1595. I can ship only to US and accept Paypal. Let me know if you have any questions. Thanks, jp

Can ‘Resizable BAR’ be enabled on EPYC Milan? I use EPYC 7443P on ROMED8-2T servers for broadcast video with RTX A6000 GPUs which support resizable BAR, but have not found a way to enable it in the BIOS. Is this even possible on EPYC? I have Zen3-based Ryzen systems on X570 boards which can...

Hi fellow server enthusiasts :) I'm currently considering a new DP E-ATX server bord with Epyc milan support and I've narrowed down my options to: Supermicro H12DSi-NT6 Gigabyte MZ72-HB0 rev. 3.0 == The Gigabyte - seems to be a tiny bit older (it has the AST2500 BMC) - 5 instead of 6 PCIe 4.0...

pics: the boxes are still sealed, as soon as someone is seriously interested I will unbox them and take detailed pictures before payment price is 2800 2500 EUR (+ vat if are in individual in EU). This is not an individual sale, corporate invoice and warranty apply. 4 are available right now...

I've built several Intel servers but am now looking to build my first server using an AMD proc (EPYC Rome to be specific): 1) Is there any difference between box vs tray (ie, warranty)? 2) What's the scoop on the HPE kits I see on Provantage? Can these be used on Supermicro motherboards? 3)...

Hi, I've recently ordered two EPYC 7551 (non-Dell) for a budget dual CPU build. After that I've came across this thread and particularly this post. Now I'm worried this won't run, since I'm unsure if I have matching part numbers. I've ordered everything in time, but the problem is I've messed up...

I'd like to build a more powerful home server with hot swap. (What I have now is a Xeon E3-1226 (4c/4t) and 8 GiB RAM in a first generation Fractal Design Define. The reason that I have a separate server box in the first place is that I thought storing all documents on a server and accessing...

Hi! My workplace bought a Supermicro server with a H11SSW-NT (EPYC) motherboard a year ago, and there's a small annoyance that I've been trying to find the cause for ever since: When Linux boots up and initializes the AMD FCH SATA controller, any empty drive bay results in a DUMMY ata port...

Hi, I'm looking for a decent setup for my 1st upcoming Monero mining rig (Dual Epyc etc), but the results I've gathered are based on Google results from 2018-2020 and they vary - a lot! My budget is around 1000-1400€. Patrick's last thread about Monero is from year 2018 and much have changed...

Build Name: Big John OS: Fedora 33 Server (RIP: Centos) CPU: 2x AMD EPYC 7742 MB: Supermicro H11DSi-NT RAM: 16x NEMIX 8GB DDR4 3200 (PC4 25600) ECC Registered RDIMM HD: 2x Micron 9300 Pro 3.84TB NVMe GPU: 4x NVIDIA Geforce RTX 3080 Founders Edition Case: Mountain Mods U2-UFO Gold Digger Case...

Hi all Let me start out be saying that this is my first server build and I'm pretty overwhelmed by the storage options available on these boards. I guess I'm more of a software guy and could use some help. :) I'm building an AMD EPYC server for homelab use. It'll be running Proxmox so its...

Sold are two Supermicro Epyc SP3 Motherboards. A H11DSi and one H11DSi-NT. Both are revision 2 and have been repaired by me. The DSi had multiple Pins bent in both sockets while the NT presumably had a transistor, labeled Q1, ripped away near the BMC, preventing POST. Specifically tested and...

Motherboard and ram(8x16GB DDR4 NEMIX 3200MHz Registered 2Rx8) are brand new. BIOS is updated to the latest v1.30. All dimms get recognized as 0GB even though the temperature reporting seems to work. Haven't contacted AsRock support yet, but just realised that I managed to get pretty much the...