asrock rack

I got an ASRock Rack ROMED8-2T motherboard and I might want to connect just to extra Intel U.2 5520 drives to it and since I haven't used the Oculink connectors the board has, I was thinking the easiest way might just be to use those. Does anyone have a recommendation for a specific cable to use...

I have a ASRock Rack EPYCD8 motherboard with EPYC 7401P processer and a single micron RECC memory module. Sometimes the system will be frozen (No matter which software is running on it). Few seconds later the monitor goes black and the debug led on the board shows a binking "00" before it...

Hello, MOBO Manual: https://download.asrock.com/Manual/ROMED8-2T.pdf The TL;DR is I would really love to use 2x NVME M2 drives and both MINI SAS HDD ports (so all 8 SATA ports) with this MOBO. Is this possible? It looked like based on the manual it was not possible, as using one of the M2...

Anyone have any info on this mb? Is this MB only available in Europe? ASRock Rack ROMED16QM3

Hello, I'm looking for a motherboard for a Rome/Milan EPYC, single or dual socket. E.g., Asrock Rack ROMED8-2T, Supermicro H12SSL, Gigabyte MZ32-AR0 for a single socket or Asrock Rack ROME2D16-2T, Supermicro H12DSI, Gigabyte MZ72-HB0 for dual socket, or similar. Thanks.

Got an ASRock Rack 2U4N-F/X200/MN 2U server which has 4 blades/nodes inside. Each node has 1 Xeon Phi 7210 plus the built-in 16GB MCDRAM. I installed Windows 10 (had hard time to install Windows server 2019 on them) on 2 of the nodes, But they are so slow. The CPU usage is very high and almost...

Update: this is currently reserved. Will update the post if it has sold or not on Sunday. ------------------------------ I've consolidated two development Proxmox hosts into one this last weekend and now have the combo below to let go of. Please note: at this point I'd really prefer local...

Hello everyone, I recently purchased the AsRock Rack E3C246D4U motherboard. I'm running it with the following hardware: - Kingston 16GB ECC RAM - Intel Core i3-9300T CPU / Alpine 12 Passive CPU Cooler - Seagate Ironwolf Pro 8TB - WD Red Plus 10TB - Intel D3-S4510 480GB SSD - WD Red SN700 NVMe...

Hi, on a new X570D4U the BMC is giving me nothing but trouble. It came with the latest BIOS and BMC firmware P1.20. - I was originally able to access the BMC via its web interface. - However, it would reset every ~10 minutes or so (heartbeat stopped, fans ramped up, the virtual devices in Linux...

For sale: AMD Ryzen Threadripper 3970X, 32 Core 64 Thread Processor Box and tool included ! Asrock Rack Server Workstation Motherboard Model: TRX40D8-2N2T with box Noctua NH-U14S TR4-SP3 140mm U-Type cpu cooler with box All in great condition. I'd like to sell this as a combo and not split...

I've been running this board for just over a year with no problem at all, and all was going well, running windows 10, it was said that updating the BIOS would resolve the IPMI issue where you couldn't log in with the default username and password. I started with the first BIOs update with the...

I picked up a nearly-new Epyc motherboard through the forums a few days ago, and for some reason it's not picking up my ConnectX-3 card at all (single port, 10GbE, I believe MCX311A-XCAT). I've tried multiple slots, and it's neither included in the IPMI inventory nor in lspci output, and there's...

Hi, I am currently planning several storage-intensive servers and stumbled over these 1U servers with 3,5 drives stacked in a 3x4 to 4x4 matrix inside the chassis. I found several manufactures for that which are all quite similar: As I can see, Supermicro, Asrock Rack, ASUS and Tyan are...

The motherboard for sale is repaired, some pins were bent and some ramslots didn't work. Since bending them back, all slots work. Used it as my Workstation for a while, with half a year on duty as my testbench after that. This is how it is currently put together and how it served me well...

I'm selling my FreeNAS server. I built it a couple months ago. Very little usage. I'm in the process of moving and need to get rid of some of my machines. PARTS LIST: Motherboard: ASRock Rack E3C236D2I Mini ITX Server Motherboard LGA 1151 Intel C236 CPU: Intel Xeon E3-1275 v6 Kaby Lake 3.8 GHz...

Hi everyone, I have the following one-of-its-kind server for sale. - Xeon E3-1275L V3 (4C/8T @ 2.7GHz with Turbo) - 16Gb ECC RAM (UDIMM). - ASRock Rack Mobo with Dual-gigabit and dedicated OOB Ethernet with IPMI. - Remote console + Sensors. - All-quiet energy-efficient design (no fans) and...

Subject says it all but i'm looking for some advice as to how to go about troubleshooting this and the best way to narrow down issues. That's the motherboard and on it are dual 2673W V1 with 114GB of Ram (two slots had dud dimms so until i get those replaced we're two dimms down). There's a GTX...

This finally arrived a few minutes ago! Starting a thread. From what I understand, we will see the Intel Xeon D-1541 version in a few weeks but time to get testing! Update 1: Adding BIOS images for main screen and the 3rd storage screen: Awaiting more memory to arrive. <Reserved for updates>