psu

Good evening everyone, I was hoping someone here could possibly tell me if a Supermicro CSE-847BE1C-R1K28LPB would be compatible with a PWS-1K11P-1R -48vdc PSU? I've contacted Supermicro directly and have basically gotten the basic "It's the PWS-1k11P-1R is a direct swap for the PWS-1K28P-SQ...

EVERYTHING IS NEGOTIABLE. Ships FREE to USA via Fedex 2-day or USPS, outside USA cost depends on location and item(s). PM me your country + city for quote. Lenovo Yoga Pro 9i (Slim Pro 9i in USA) asking $2500 Purchased Sept 2023 Lenovo UK. Flawless display, insanely fast. No problems...

I recently bought a 4U server from ebay (£30). It came as a complete package (chasis, PSU, motherboard, RAM, CPU, HDDs, GPU), but I was really only interested in the chasis, so I've taken out the (very old) guts and replaced everything, including the PSU (which is too low power and too noisy)...

I am in the process of setting up my homelab to move out to my tower site to get some better speeds. Out there I have a -48vdc rectifier rack and would like to run my homelab off of the battery bank without trying to find an isolated inverter. TLDR is the Dell PowerEdge R730XD compatible with...

Hello dear members! Looking for some advice on replacing an old power supply. Question is ¿should I care for the maximum combined wattage on 3.5v and 5v rails, given the list of components below? Or ¿should I just go for the most efficient psu I can afford? Here are the specs: -Mobo: Asus p6td...

Hi all, first post so apologies if this is on the wrong board. I've got a Dell Optiplex 3050 Micro which nominally takes a 19.5V DC power supply, however I want to install it in an industrial electrical cabinet and run it off the available 24V DC. I could rig up a DC/DC step down converter but...

I'm not new to PC building but enterprisers are new to me. I found a cheap DL180 G6 in my area that turned on. So at least I have a case and a set of redundant power supply. The problem is that no mater what I do, the power supply does not turn on my Supermicro X10 board. I tried another PSU and...

I'm looking for a chassis to host a homelab server. Because the server will be in my office I'm aiming for quiet as possible, so I want to replace the redundant 1U PSUs with something quieter. I think I've seen replacement brackets for blade style PSU that can convert a 2U or 3U into a ATX or...

What exists for super high efficiency, lower wattage power supplies? Ideally in the 300-400W range, if not 275W. Both SFX and ATX form factors are fine. I'm trying to avoid any rackmount-oriented PSU in particular unless they are provably silent (or silent at 2m) at 150W -- likely 100-120W --...

Hi everyone, I got a 5017GR-TF 1U server. I find that the PSU fan is noisy. I would like to know if it is possible to replace the PSU and the power distribution board to a standard 1U PSU. I see there are Post about replacing redundant PSU but I cannot find information related to the SC818...

Hi, So I recently bought two 7150-C12P of a STH forums member (thanks Alistair!) of which one was broken and missing it's PSU (the other one is working fine this far at least!). I've taken a look at the circuit boards and it looks absolutely fine, no broken components, no burn marks, but should...

Does somebody know if I can mod a Supermicro 933T and exchange the triple-redundant (Sp382-ts 380W) for a p920-SQ and exchanging the powerboard. Is there a lot of modification needed? If not, somebody knows if the fans of Sp382-ts 380W are very noisy?

Hi there, I have a very strange problem with a new NAS install. I had a Supermicro A1SAi for 5 years before I got the Intel AVR54 bug, which Supermicro absolutely refused to fix. For that matter I decided not to buy a new Supermicro motherboard. Anyway, just to say that the 6 disks (2 SSDs and...

Hi All, I recently bought a dell R720 with a single 750W PSU. It came with a DVD and 6 spinning drives and 96 GB RAM. I then replaced the DVD with an SSD (Using SSD caddy) and ordered: 1. A pair of Intel XEOM E5-2650 v2 processors 2. 16GB DDR3 PC3 ECC RAM x 4 (Total RAM would be 64 + 96 = 160...

I am conceptualizing right now a new 2U for my rack rendering workstation. Doing this is part for fun and part for it's intended use and part to keep noise down. I want to buy my own chassis and E-ATX motherboard, RTX GPU but the problem is the power supply. I'm thinking my power needs are...

Hey there - So I'm working on this issue for a week now... (I hope this is the matching Subforum) I bought a Chenbro RM23712 with a Redundand PSU Cage but no Modules in it half a year ago. A week later, I got a pair of Intel DPS-750XB's and tried it with a MSI Z87 Mpower-SP and a Core i5 4460...

I have a Chenbro NR40700. The one listed here: https://forums.servethehome.com/index.php?threads/chenbro-cleversafe-slicestor-1440-48-bay-sas-rebuild-for-home-use.12522/ Instead of modifying the chassis, my idea is to swap out the PSU fans for a quieter model. Can anyone here do this for me? I...

This is a bit of a multi-genre question, hopefully I'm in the right forum :) I'm running an HPE ML350e gen8 v2 as a home nas/container/everything server but i'd like to save on power consumption and cut down noise. I wanted to build a new server, but realized that the case and drive cages are...

Hi, I intend to purchase a SuperMicro server board like the X10DRT-P : X10DRT-P | Motherboards | Products | Super Micro Computer, Inc. In the manual there no specific on PSU. In general, is a [ 1200w 24-pin + 2x8-pin PSU ATX2.4x/EPS2.9x ] PSU compatible with this kind of board ? Do I need to...

Greetings I have a HP Proliant ML310e Gen8 Xeon Quad Core Server which has a 460W redundant PSU fitted. I notice it has a PSU plug labeled P12 which is a 6 pin plug and is not used in current configuration. Is this for additional power to any fitted GPU please or has it another purpose ...