lsi

Hi, I'm a bit new to this, but I'm pretty sure my card is in IR mode, and I need to put it into IT mode to allow passthrough for my TrueNAS Scale Fileserver, to allow Truenas to create a ZFS array from the connected drives. From what I've read, I'm pretty sure this is necessary. Currently, the...

I have an ASRock Rack ALTRAD8UD-1L2T board that’s been working great with an M.2 as the boot drive. I’ve been testing and playing around with it for a bit with no issues. Recently, I installed an Avago MegaRAID 9460-16i HBA with the goal of booting from an SSD attached to it. This broke...

Hi there! I'm searching for the following RAID-Controllers for an good Guide to flash all of them into 'IT-Mode' to get them working as HBA: - Broadcom / LSI Megaraid SAS 2208 [Thunderbold] (rev 05) - Broadcom / LSI Megaraid SAS 2008 [Falcon] (rev 03) - Broadcom / LSI Megaraid SAS 2108...

Hi I got a HP branded LSI 9205-8i allegedly it has IT/ HBA mode firmware from Ali-E. I wanted to put some SAS disks as a JBOD (Not RAID) For whatever reason this card is not showing in BIOS, and there is no splash screen with the usual 'Press Cntrl + something' I tried this card on a few...

I have a 24HDD Innovision case, it contains 2 backplanes with 12 HDD each. The backplanes have 3 miniSASHD ports. I want to create 2x RAID5 arrays in Xpenology from the disks I have: - 9x HDD 8Tb - 15x HDD 6Tb Tell me which option of using controllers would be better? 1 9305-24i for all disks or...

Hello STH community! I wanted to get some input into the best HBA card for my setup - my "server" is a repurposed SFF workstation (HP Elitedesk 800 G1 SFF) and I'm tired of the mess of usb adapters I am using so looking to build a DAS. While I can get a $50 LSI 9206-16e low profile I understand...

Alright for the past 9 hours I've been trying almost every article I could find to do this but I'm out of patience and could use a hand. From my briefing scrolling it seems I have to wipe the controller and then reflash with vanilla Broadcom LSI firmware to get this to work? I'm hoping there's...

Hello everyone, I’m starting to exhaust available sources of information as none of us can seem to determine the issue with this HBA so far. Been on the Unraid forums, discord, Reddit, etc and so far no luck. Current system: -Dedicated server chassis with i9-12900k, 64GB DDR5 -2x SM JBOD’s...

*** This is for HOME USE. Very, very limited budget, so please don’t suggest things that are thousands of dollars. I am working with what I have available. Windows 11 Pro machine Looking for help to see if I can cross flash the eeprom of a Sun Oracle MegaRAID 9361-8i to LSI or something. I have...

I have a RMS25CB080 that I flashed to try and use IT mode, it errored with something about a "card revision mismatch" but now it is no longer showing up as an option rom, and not working. The storage light on the front of my server is also solidly lit. I have an Intel S2600GZ with a LSI 2208...

SOLUTION: Asked a friend of mine for help, they researched a bit and found this KB450057 - Using Staggered Spin Up - 45Drives Knowledge Base Checked the details of every disk in hdparm and indeed the faulty drive had this feature turned on. After running hdparm -s0 for the drive it started...

Hello!! I am troubleshooting disks not being recognized by my HBA. I have an overkill HBA for my purpose purchased used from eBay but I figured it would still work for my purpose and was reasonably priced. For my setup, I'm running: Server HPE DL360 Gen 9 x2 Intel Xeon E5-2690 v3 x2 16GB...

I'm looking at getting the SuperChassis 826BE1C-R609JBOD and I'm struggling to figure out what LSI card to get for it. This will be going into an ROMED8-2T (PCIe 4.0 x16) running TrueNAS SCALE. If I get an 8 port HBA does that mean only 8 drives would be seen, and I would need a 2nd card for...

Before I give ebay more of my money I thought I would ask here. I prefer a single -16e but open to two -8e. Needs to be LSI and able to flash into IT Mode. Found one locally. Thank you all. Thank you

Hello everyone, Is it possible to flash the Lenovo 930-8i card back to the LSI 9460-8i firmware? I'm trying to figure out why Lenovo would take a 9460-8i card, that's labelled 9460-8i, and put their firmware on it. With the Lenovo firmware, this card will not do NVMe drives, and I'd like that...

Hello every one. And today I am need your help. May be some one knows how I can check S.M.A.R.T. my disk on this motherboard? My operation system is Windows Server 2008 r2. I know what this old version of motherboard and operation system, but she is work very well and I want to upgrade her work...

Please Help!! The card seems to be stuck. I don't know where to go from here. From eBay, IBM Lenovo ServeRAID M1210. It said it was flashed to IT mode. However, this is in the dmesg: AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd mrsas0: <AVAGO Fury SAS Controller> irq 41...

Hello, my MB is a Supermicro X10SL7-F, that has a onboard Lsi controller, that I have in IT mode. I think it is 2 different controllers and I'm planing on installing proxmox on this server, but I would like to use it with truenas. Will I be able to passthrough the onboard LSI controller? Or that...

Hello. I hope that someone in here have a little more experience with this than i do. I bought an LSI 9300-8i to connect directly to two 1.92TB 12G sas drives. I then also bought TWO different kinds of cables that would take SATA power to power the drives, i know they deliver power as i have a...

Okay maybe you all could help me. I cannot seem to connect to my IBM server's ServeRAID controller. I go through the usual boot, but when I Ctrl-H to enter the WebBIOS for the RAID controller, it locks when I click start. I cannot move the mouse, no keys seem to work. I left it overnight...