asrock

Hi everyone, I'm building a GPU cluster and encountering a challenge with the GPU topology. Here's my setup: Motherboard: ASRock Rack ROMED8-2T GPU Configuration: 5 x RTX 3090 GPUs inserted into PCIe slots 1–4 and 6, connected with PCIe 4.0 risers. The system is functioning well overall, but...

Hello everyone, I recently purchased an ASRock N100M motherboard with the following setup in mind: Use an ASM1166 M.2 to 5x SATA adapter to connect 4 SATA drives. Attach 2x 240GB SSDs directly to the motherboard over SATA. Install Proxmox as a bootable RAIDZ set on the 4 SATA drives. Add the 2...

Hello Guys, I have 2 Kingston KSM56E46BD8KM-48HM modules they work both when inserted 1 at the time in slot B1 But when i try to use them both in doesnt matter wich slot i did try all of them the computer hangs and give error code C5. There are no other pcie devices connected even did try to...

Hello folks! I'm considering buy the ASRock Rack GENOAD8X-2T/BCM to pair with a AMD EPYC 9754 for my homelab. I've found the review from STH site (btw, thanks STH! Awesome review and show that this board seems very versatile!) and also read the manual to the end and one thing is not matching to...

Hi, I'm looking for ASRock Rack X570D4I-2T mainboard to buy (used). Anyone who can help? Thanks!

Just noticed this 4X4-8840U-1U Cant wait to see the strix point products. AMD Ryzen™ 8040U-Series 2 x 262-pin SO-DIMM DDR5 5600 MHz, up to 96GB (48GB per DIMM) 2 x USB4, 1 x USB 3.2 Gen2, 2 x USB 2.0, 2 x M.2 Key M, 1 x M.2 Key E 1 x Realtek Gigabit LAN, 1 x Realtek 2.5 Gigabit LAN Supports...

Hi all. I'm completely new to server builds and just built my first PC. It's based on the ROMED8-2T with an Epyc 7302P. 128 GB RAM (32x4). I have a 2TB SSD. 2x1TB M2 SSDs. 12TBx6 HDDs that will ultimately be in a raidz2 config. Noctua cooler. Corsair 750 power supply. Housing is Fractal Design...

Build Name: projekt NV24Me Operating System/ Storage Platform: Chassis: SuperMicro SC216BA-xxxxx Backplane: Supermicro BPN-NVMe3-216N-S4 24-port 2U (SC216/219) NVMe direct-attach Power Supply: SuperMicro CPU: AMD EPYC 7F52 CPU processor 16c|32t Motherboard: ASRock Rack ROMED16QM3 Memory: 16x...

Anyone have any info on this mb? Is this MB only available in Europe? ASRock Rack ROMED16QM3

I’m thinking of maybe switching my supermicro x11ssh-f motherboard to an ASRock EP2C612 WS. I’m really fond of the IPMI on supermicro so I’m wondering if anyone has any experiance with asrocks? I can’t seem to find any info on if they have a working iOS app. And also, I’ve got a supermicro sc846...

I just put together a new system and, as soon as I put a PCIe 4.0 x4 M.2 adapter card in it (this one: AORUS Gen4 AIC Adaptor Key Features | Solid State Drive (SSD) - GIGABYTE Global#kf), the event log in the BMC sees a few messages per second stating the BIOS sensor reporting.. something? I am...

Good afternoon, I am planning on putting together a new, low core EPYC system (I need the PCIe lanes more than the cores) and I am currently contemplating whether I should go with another ASRock Rack board, the ROMED8-2T, or one of the Supermicro H12SSL-* ones (probably the -I as I have a spare...

I'm following this guide to reflash my IBM M1015 card to IT mode: https://www.servethehome.com/ibm-serveraid-m1015-part-4/ The motherboard is EPYC3251D4I-2T After completing this step megarec -writesbr 0 sbrempty.bin megarec -cleanflash 0 <reboot, back to USB stick > I can't boot. The system...

Hello, I have a "rather void of any information system" Asrock 4U36L2S-C621 - with a EP2C621D16-4L motherboard. I'm also in contact with Asrock support but I would really like to rack this server. I have a Intel Xeon Silver 4214, in it with 128GB of ram, two HBA cards and was expecting to use...

Good day all, First time here, but no stranger to fora. (got referred from tweakers.net, and been watching a couple video's on youtube from STH). So . . . i'm having an issue. (strange huh?) I bought an Asrock Rack EPYC D8-2T, as its specs look great, i don't really need Gen 4.0 PCI-E so...

I'd like to build a more powerful home server with hot swap. (What I have now is a Xeon E3-1226 (4c/4t) and 8 GiB RAM in a first generation Fractal Design Define. The reason that I have a separate server box in the first place is that I thought storing all documents on a server and accessing...

Motherboard and ram(8x16GB DDR4 NEMIX 3200MHz Registered 2Rx8) are brand new. BIOS is updated to the latest v1.30. All dimms get recognized as 0GB even though the temperature reporting seems to work. Haven't contacted AsRock support yet, but just realised that I managed to get pretty much the...

Hello, i want to sell a few things. So here is a list: Brocade ICX6610-24p - one PSU - need to sell it cause of the to high power drain - 330€ Intel Optane 900p 280GB PCIe HHHL - 14TBW - 220€ Samsung PM1725a 3.2TB PCIe3x8 HHHL- High Endurance drive 29.2PBW ( 0,044PB used) - 6200MB/s read...

Hi, I just built a system with a 7282 and an Asrock Rack EPYCD8-2T. It seems to be rock solid with Lubuntu 18.04 but here are a couple of question I really hope you could answer since I'm driven crazy with them. 1. OS-independent: I just cannot manage to have the IPMI working over the...

SOLD I'm pretty much done with my encoding project and want to get back to gaming, so I'm hoping someone is interested in buying my ThreadRipper 1950x and AsRock Tachi micro-ATX motherboard. Motherboard Info: https://www.asrock.com/mb/AMD/X399M Taichi/index.asp Comes with original box...