No, you need UDIMMs.Is there any chance this would work?
Samsung 32GB PC4-17000 DDR4-2133MHz Registered ECC CL15 288-Pin
Can get these used and extremely cheap locally
-j
No, you need UDIMMs.Is there any chance this would work?
Samsung 32GB PC4-17000 DDR4-2133MHz Registered ECC CL15 288-Pin
Can get these used and extremely cheap locally
-j
that's what I'm running in mine 3700x and 5700x, those cpu are always on top of charts for most compute per watt usedIve been looking at 3700x and 5700x if i get a stack of boards cheap.
8core/16thread and 65w like the cooler they got in the bundle is rated for.
They are about 100€ for 3700x and 140-160€ for 5700x used here.
No those will not work, UDIMM onlyIs there any chance this would work?
Samsung 32GB PC4-17000 DDR4-2133MHz Registered ECC CL15 288-Pin
Can get these used and extremely cheap locally
-j
It will run win11 fine without itHas anyone found the CTM010 TPM2.0 kit anywhere cheap?
Would be nice to run Win11 on this thing
Those codes does not apply, at least for me.On ebay for 37,20€! Crazy!
![]()
Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen 5000 4000 Server Board NEU | eBay
Für AMD Ryzen 5000 Series / 4000 Series / 3000 Series. P/N: MC12-LE0 Rev. 1. 1 x Mainboard MC12-LE0 NEU / NEW. AMD Socket AM4. 1x Blende wie auf dem Foto. Technical data / Technische Daten. Drucker & Zubehör.www.ebay.de
Code: RESTORE24
Code: PIO10012024
Codes did not work for me eitherThose codes does not apply, at least for me.
When ive done it for m-atx mobos like this in a standard case meant for atx, ive used the typical ribbon riser from the bifurication card and just mounted cards in the unused slots next to motherboard.Splitting risers are a possibility… but also raises the question of fitting components in the case.
(If this one were not solt out, it would be a solution for a x8 card and two M.2 in the x16 slot.)
That's why it's such a great deal, though. I am not made of 25/100GbE money.why 40 GbE? it's a dead end
Hey man, don't threaten me with a good time ;-)it may be easier to look for a more appropriate motherboard rather than try to shoehorn everyting on this particular MC12-LE0 because it happens to be good deal right now.
25 GbE can be less expensive than the CPU you're going to put in this MC12-LE0…That's why it's such a great deal, though. I am not made of 25/100GbE money.
use something like this card and set the x16 slot to x8 x4 x4What do you suggest for a storage server - I would need one pci slot for the 40gb nic, and one for the pci nvme. Is it possible to add a hba or a raid controller somehow on top of that?
My bad for not telling all the details immediately.use something like this card and set the x16 slot to x8 x4 x4