EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen
- Thread starter flobert
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
that's what I'm running in mine 3700x and 5700x, those cpu are always on top of charts for most compute per watt used
No those will not work, UDIMM only
Has anyone found the CTM010 TPM2.0 kit anywhere cheap?
Would be nice to run Win11 on this thing
-j
Would be nice to run Win11 on this thing
-j
On ebay for 37,20€! Crazy!
Code: RESTORE24
Code: PIO10012024
Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen 5000 4000 Server Board NEU | eBay
Für AMD Ryzen 5000 Series / 4000 Series / 3000 Series. P/N: MC12-LE0 Rev. 1. 1 x Mainboard MC12-LE0 NEU / NEW. AMD Socket AM4. 1x Blende wie auf dem Foto. Technical data / Technische Daten. Drucker & Zubehör.
www.ebay.de
Code: RESTORE24
Code: PIO10012024
Those codes does not apply, at least for me.On ebay for 37,20€! Crazy!
Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen 5000 4000 Server Board NEU | eBay
Für AMD Ryzen 5000 Series / 4000 Series / 3000 Series. P/N: MC12-LE0 Rev. 1. 1 x Mainboard MC12-LE0 NEU / NEW. AMD Socket AM4. 1x Blende wie auf dem Foto. Technical data / Technische Daten. Drucker & Zubehör.www.ebay.de
Code: RESTORE24
Code: PIO10012024
What "pci nvme"? There is a x1 M.2 slot for booting without using a SATA port.
Splitting risers are a possibility… but also raises the question of fitting components in the case.
(If this one were not solt out, it would be a solution for a x8 card and two M.2 in the x16 slot.)
If you do need a HBA and a NIC (why 40 GbE? it's a dead end) and one or more x4 NVMe drive, it may be easier to look for a more appropriate motherboard rather than try to shoehorn everyting on this particular MC12-LE0 because it happens to be a good deal right now.
Splitting risers are a possibility… but also raises the question of fitting components in the case.
(If this one were not solt out, it would be a solution for a x8 card and two M.2 in the x16 slot.)
If you do need a HBA and a NIC (why 40 GbE? it's a dead end) and one or more x4 NVMe drive, it may be easier to look for a more appropriate motherboard rather than try to shoehorn everyting on this particular MC12-LE0 because it happens to be a good deal right now.
Last edited:
When ive done it for m-atx mobos like this in a standard case meant for atx, ive used the typical ribbon riser from the bifurication card and just mounted cards in the unused slots next to motherboard.
That's why it's such a great deal, though. I am not made of 25/100GbE money.
Hey man, don't threaten me with a good time ;-)
25 GbE can be less expensive than the CPU you're going to put in this MC12-LE0…
STANDARD PROFILE Intel XXV710-DA2 Dual-Port 2x 25GbE-LAN SFP28 PCIe 3.0 x8 | eBay
Professionelle Netzwerkkarte für Ihren Server oder Ihre Workstation. Netzwerke: 25GbE, 10GbE, 1GbE. 1x 25GbE Dual-Port Netzwerkkarte. Steckplatz: PCIe 3.0 (x8, Standard Profile). Alle Server mit PCIe 3.0 (x8, Standard Profile) Steckplatz.
www.ebay.de
25gbe nics are cheap, the switches are not as fun prices on yet.
Something like a 40gbe connectx4 probably cost more than 25gbe now.
Ive been buying 25g cards to use as 10g for a while, usualy just 5-10$ more.
For the hp/dell formfactor cards the 25g can even be cheaper than 10g, less demand for those models i guess.
Still rocking ancient 40g switches with a mix of 40g and 4x10g breakouts.
Since they were 100$ and barely using over 50w with 20ish ports in use.
Im putting a 2x25g used as 2x10 and 3.2tb nvme card on my stack of boards.
Some spinners on the onboard satas.
Something like a 40gbe connectx4 probably cost more than 25gbe now.
Ive been buying 25g cards to use as 10g for a while, usualy just 5-10$ more.
For the hp/dell formfactor cards the 25g can even be cheaper than 10g, less demand for those models i guess.
Still rocking ancient 40g switches with a mix of 40g and 4x10g breakouts.
Since they were 100$ and barely using over 50w with 20ish ports in use.
Im putting a 2x25g used as 2x10 and 3.2tb nvme card on my stack of boards.
Some spinners on the onboard satas.
My bad for not telling all the details immediately.
40gb because i already have switches with 40gb uplinks, and bought two more (4×40gb and 48x10gb) for 150eur. I also have 40gb nics from before (chelsio t580). In the hp servers I use supercheap 544flr flexlom nics (40gb/10gb)
If anyone knows of a relatively cheap 100gb nic and switch please let me know.
For the nvme, I would need something bigger (6.4tb+) so I won't be able to use m.2 format.
In theory I can connect 6 x 20tb drives to the sata ports and run zfs on truenas..
Just another data point:
My new 5800x was detected and working with BIOS F06, no issues. My RAM is two modules of KSM32ED8/16HD, installed in the A0 slots (the black slots).
I haven't been able to update to F11 through the BMC, though. I might try to fix that later.
I also expected the CPU cooler mounting to be rotated 90 degrees from what it actually is. Now my CPU cooler (NH-D15) is blowing air bottom-up in my chassis, I was expecting to mount it to move air horizontally in the chassis
My new 5800x was detected and working with BIOS F06, no issues. My RAM is two modules of KSM32ED8/16HD, installed in the A0 slots (the black slots).
I haven't been able to update to F11 through the BMC, though. I might try to fix that later.
I also expected the CPU cooler mounting to be rotated 90 degrees from what it actually is. Now my CPU cooler (NH-D15) is blowing air bottom-up in my chassis, I was expecting to mount it to move air horizontally in the chassis