His APU is in the QVL list with a note of GFX Mhz, not note that says not activepossibly the iGPU is not powered(lacks voltage on socket)
Pretty sure that is not the issue here
Last edited:
His APU is in the QVL list with a note of GFX Mhz, not note that says not activepossibly the iGPU is not powered(lacks voltage on socket)
Clarify this please... where is it, you can't see GPU ?Unfortunately, the iGPU is not visible with default BIOS values (iGPU deactivated) and if I set the iGPU to active in BIOS, I cannot boot anymore and need to clear CMOS to boot again…
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root ComplexClarify this please... where is it, you can't see GPU ?
what does lspci say ?
you see BIOS version after power cycle, reboot, CPU is updating this, BMC can not know...I'm having issues flashing bios to F11.
Ive updated bmc to the newest version.
Bios flashing says complete, bmc restarts and bios is still on F06.
Flashed it 4 times successfully and still no go.
CPU needs bios update to function, so bmc is my only way to do this...
Anyone have any suggestions?
-j
yes, but can be another chip not that what CPU is running with !Technically it could read the EEPROM directly, but yeah, that seems likely.
ok, now let CPU POST ! BIOS sends data to BMCI have power cycled, unplugged power etc after every flash attempt.
-j
dead or unsupported CPU.It does not post.
I don't get a signal on the monitor either on gpu or embedded vga
-j
btw: do you have the button "backup BIOS" or "dump BIOS" ??It does not post.
I don't get a signal on the monitor either on gpu or embedded vga
-j
and you have updated BIOS1 ? on some mboard there are 2 BIOS, main/backup BIOS.It does not post.
I don't get a signal on the monitor either on gpu or embedded vga
-j
so dump it and compare with the F11 you flashed, or upload it, i can check it for you.It's the MB this entire thread is about, so I have the dump bios button in the bmc, yes
-j
is the board normaly turning on after BIOS flash ? (should be OFF while BMC FLash update)Brand new ryzen 7 5700x.
Others have it working with bios F11
-j
have Gigabyte MS33-AR0 can flash without RAM&CPU.It's not possible to flash bios with host off.
Power it on and flash is succesful
-j