Never done that and when its working it worked all the time.Regarding you problem with RAM, maintanance manual says that after memory error, you need to reset the error status after replacing memory. Maybe worth the try?
No, had the CX3 or nvme in it, both worked fine.Did you have any issues with first PCIe slot (closest to CPU)? Manual states that it's "Dedicated slot for boot controllers".
I actually think I dobut you got 5 dual 10G nics already?
I know, but 5 servers living in their own little island is not very ideal either And if you want to do any kind of storage sharing between the server, you need 10gbps or higher.O/c running 10G BaseT is not ideal for a low power build...
Not that 40Gbps uses less power If you also factor in your need a switch capable of 40gbps - and I sold my 40gbps gear a while a go, so I am definately not buying that stuff backO/c - I am surprised you didnt catch my implicit recommendation of going to 40g
Specs says min 26.3w, MAX when all ports fully used @line rate 49.5w - so quite a bitwhat does the 708t use? a sx6012 runs at 30w , thats not bad for qsfp+...
but o/c to each their own
This 'pessimistic' outlook just hit me... Dont think it will go particularly cheap...
Thats nice of them, but considering the unit price ex shipping its not really surprising.Also, it took me 8 boxes to get 5 working completely fine - one got memory issues, two had problems flashing the latest iRMC version.
Kudos to the seller though, they kept on sending replacement units (free of charge) 'till i was happy and to boot I can keep the 3 semi-functional ones