zfs

  1. Patrick

    ZFS native on Ubuntu 16.04 LTS

    ZFS on Ubuntu was in tech preview mode for Ubuntu 15.10. In 16.04 LTS it is set to be installed by default. For those that have not seen it yet, here is a screenshot from the latest 16.04 LTS build I had on hand: With ZFS on Linux heading to being extremely easy to get installed (e.g. it is...
  2. P

    FS|VA|$250| DELL POWEREDGE FS12-SC 2xL5420 24GB RAM 12x TRAY

    Looking for local sale located in Northern Virginia/Washingon DC area. $250 DELL POWEREDGE FS12-SC 2 x Quad Core L5420 2.5GHz 24GB RAM 12x trays 2x internal 2.5 drive mounts dual onboard NICs 1 ipmi/bmc NIC - remote mgmt has updated BIOS and BMC from gigabyte loaded. Have been using for...
  3. M

    OmniOS Napp-it Replication Question

    This question is aimed mainly at Gea but others may be able to help. I'm running OmniOS with Gea's excellent Napp-It on top. I'm currently replicating several ZFS filesystems from one pool to another pool using Napp-it's replication feature once per week. I've noticed that on both the source...
  4. K

    HP EG0300FBDBR Firmware Upgrade

    I've recently inherited a few HP 2.5" 300G SAS 10k drives (EG0300FBDBR). I'm going to attempt to use them in a ZFS configuration, 18 drives total across 3 Dell H310s (flashed to LSI 2008 HBAs). From what I can tell these drives have 3 different versions of HP firmware on them. The majority...
  5. B

    Raid configuration with zfs

    Hi, We are having 6 disks on our server with 5x480GB ssd and 1x120GB SSD and trying to figure out the best raid configuration. We are looking to configure with raidZ2 with 5 disks and to use one disk for centos installation. But I am afraid if it makes issues when the installation drive fails...
  6. B

    SSD disks performance issues with ZFS

    Hello, We are currently testing our using ZFS on Linux as a storage platform for our VPS nodes but we don't seem to be getting the performance figures we expected. Can you please provide some suggestions as to what we should be tweaking to reach higher iops? Hardware is SuperMicro with the...
  7. EluRex

    How to use OCZ rev350 as ZIL & Cache

    I am facing a problem about kernel module loading order. I am using Proxmox VE 4.1 (Debian 8.1) and root on ZFS mode. I have a OCZ Rev350 NVMe PCIe SSD need to configure as ZIL and cache. However OCZ NVMe has its module called oczpcie and it loads after ZFS module is loaded, so therefore...