switch

Hey, so I have purchased a few old enterprise switches, they have a great feature to price ratio and can be had for next to nothing. Unfortunately they are to loud for most people to be used in office settings where the switch is in the same room as workstations, etc. I have a D-Link DGS-3427...

Hey, So I have a similar switch, a D-Link DGS-3427, which is a 24-port gigabit switch with a 10G backbone (I have two CX4 expanders currently). I really like it but I can't help there might be some nicer stuff out there that could be had cheap. Has anyone worked with the Dell Force10 network...

**SOLD** I just upgraded to 10gb and no longer really have a need for this switch. It is in absolutely perfect "like new" condition as it was just racked in my home for light home use. So no scratches, non-smoking home, has rack ears, etc. I am asking $150 + Shipping for it. Preferred payment...

Hello Fellow Members! Happy New Year to you all. Starting the new year off with some massive hardware cleanup of some old servers I acquired over the years. Please let me know if there is anything on this list that you find of interest to you. Items are all located in Toronto and payment...

Hi Guys, What is the verdict on these two? What I'm I going to miss if I take the Unifi 16-XG, anything? Is Ubiquiti manageable from web or does it require the Ubiquiti controller application? Seems like 16-XG is considerably cheaper so want to know any gotchas. Thanks

I have a problem with this switch and the problem is the login button is gone on the web interface .Before you reset the switch i did a reset many times and does not fix the problem . I got a few of them for free so i have no idea the environment they came from .

I've run out of ports on my SG-300 POE switch (swore 10 ports would be more than enough for my needs :confused:) and am looking to upgrade to a better L3 switch with >=24 ports. The tentative plan is to keep the SG-300 and convert to L2 mode to run the 3 APs in my house. So I've looked around...

I picked up a Mellanox IS5600 and do not have any personal use for it. Total Newb when talking about commercial-ish switches. This unit taken out of a working environment. Retailed for $500,000 retail LOL. Seriously. Half a milli! Listed for $3,000 USD plus shipping. Paypal or local cash...

I bought 2 servers with X9DRH-7TF motherboards and each server has 2 x 10GbE RJ45 NICs. Currently those servers and all other clients are connected to a 1 Gbps switch (Cisco SG-300). I'm not sure what the term is for a point-to-point, switchless connection between the two servers using 10GbE...

Hello, I am using QUANTA LB4M switch and everything work fine. Now I want setup on few ports to work DHCP so I dont need all time setup IP when connect PC/Laptop. What I need done in web gui? Need setup pool and DHCP filter enable on few ports or?

Hello all, I was thinking, for my living room where I have quite a few servers running (silent !), to do a custom 10gbe IPoIB setup. In my lab room I could use the Voltaire 4036 (non-E version unfortunately) which I still need to find a way to silence. It's way too noisy even for the server...

Hi, Would anyone know the difference between a normal 460W Emerson power supply, and the Emerson power supply that is sold only for Arista switches? Ordered some over e-bay and it turned out they were not recognized by the Arista switch. The switch powered up, but had some issues recognizing...

Hi, I was scouting for days for a good SFP+ ethernet 10G switch online and found many products, however, not many match my requirements, namely low power consumption and low noise. I managed to find one which does not seem to appear almost anywhere, either on E-bay or advertised through forums...

Hello I used search, but could not find an exactly matching thread. So here is a new one. I am looking for a * fanless, * managed * 8 to 12 port switch with * VLAN support (32 will do fine), * link aggregation and * STP support. I do not need PoE or QoS. I think I'll rather buy two...

Hi. I've been buying from members here, now its's time to sell. I have a Zyxel 1910-48 switch I used for about 6 months, but no longer need. It has the rack ears attached, and I'll include the power cable. I have a few short CAT-6 patch cables (6" to 2-ft) I can toss in as well if you need...

UPDATE 7/11/2018 - It's been discovered that the version 8 Brocade firmware originally on the site was an internal-use only, untested beta version. It has been removed from the guide and replaced with the latest v7 mainstream release which is rock stable, well tested and has had a few more...

Hey, I need a fanless (no compromise here) 16+ port (smart) managed switch with LACP and VLANs support. So far I own only one POE+ device (UniFi AP) and I'm ok with using PoE injector. I mean, I'd love to buy 16+ PoE+ fanless switch if such thing existed in reasonable price (<300 EUR), but if I...

In my searches for a Netgear S3300-28X, I found this listing. Looks like a managed 24-port + 2x 10gbit SFP switch. 2 expansion ports in the back can do another 2x 10gbe. Anyone have experience with this one? Someone else should buy this before I convince myself that I need it for my main home...

I have a home lab and work lab and use HP Procurves (2810 and 2530 mainly). Since HP's policies of paid firmware updates, splitting HPE and HP and their apparent decline in support service what vendor are most of you here using for your home labs?

I was looking for 2 switches for our ha-cluster. Therefore I need a switch that is able to do LAG over 2 (or more) switch units. I finally slipped over the SG350x series, that seem to ne pretty cost effective. I was wondering what the main difference between the SG550x series might be except...