I want to use 2 E5 2683 v3 CPU's with the SUPERMICRO MBD-X10DAL-I motherboard. The motherboard has 8 ram slots and supports 2133mhz DDR4. I am thinking about getting a couple sticks of this ram as it may allow for easy expansion to higher amounts of ram. I know with enthusiast grade hardware you...
I am looking at the Supermicro X10DAL-i with dual E5-2683 v3 CPU's. The motherboard has a listed core/cache limit of 22 cores/ 55mb of cache. The dual CPU's will have a total of 24 physical cores and 70Mbs of cache. With this motherboard will only 22 cores work and only the first 55 mbs of cache...
I'm having issues with my X9SCM-F Board registering all 32GB of RAM I have installed. I have double checked to make sure they at seated correctly and even removed and put them back in. I first noticed it when I had System properties open in Windows 8.
I ended up running a few apps to see what...
I came home from a short vacation last night to find my computer to be pretty warm but would not turn on. My initial thought was the power supply, I manually checked the power supply with a multi-meter. The power supply checked good. To be extra sure I went and purchased a new power supply...
Hello all,
I'm having issues with getting my setup working.
MOBO - Supermicro X9SCM-F REV 1.11A BIOS 2.0A IPMI Firmware 1.27
Ram - (2) kvr1333d3e9sk2/8g kits 16GB total (4X 4GB Sticks)
CPU - i3-2100T
PSU - Corsair HX750 or PC Power and Cooling PPCMK3S400
I can not get the system to stay...
I'm running a Tyan tomcat n3400b bios v2.01 Quad core
American Megatrends
On board Card basic standard
8g ram
Windows 10
Last night I tried to flash bios, which was successful at the end but went into a black screen, I waited for 5 mins to see what's next, nothing happened so I reboot it and...
Hi All!
This is my first post and question, so please be patient. :rolleyes:
May you kindly point me out some available board or system actually supporting the LGA1356 Xeons E5-2400 v3 (Q1-15)?
Thanks in advance for any hint!
I have 10 C6100 chassis [40 nodes total] running a render farm. I ordered 8 spare boards, RAM and CPUs when I got the original order. This setup is obviously on a heavy load, maxing out the CPU for hours at a time. These are located in a server room with sufficient air-conditioning, with room...
Hello,
I bought a motherboard X10DRC-LN4+. I powered it on, CPU and memory are Ok, I can access the BIOS. But it doesn't detect any SAS and/or SATA driver. Also a red led is always on near SAS controller. The manuals says that it means : "SAS controller error". Can anyone help me to fix this...
Evening all,
I am in the process of building a home ESXi server and have run into a couple of different issues. Was hoping someone might know more than I (easy enough in this case) and could possibility give me a bit of direction...
This is the system that I've put together so far...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.