VRM modify ICC_MAX to run high TDC OEM cpu
- Thread starter RolloZ170
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I am willing to pay $20 for you to remotely operate it for me, is that okay? Deskin is a remote software, please thank you
it scan's, but find nothing.
makes no sense currently. i will do the same you done.
it is weird you get another cmd window auto opened, which i never have.
you run in administrator account. can you try same with normal user please ?
Dear blogger, I have switched to two versions of the system and still use CMD in administrator mode. I went to check the solder joints and there seems to be no problem? I am mentally and physically exhausted and plan to use 200 CNY to modify for others, but I can no longer learn your skills and feel very disappointed.
it worked for others, it worked yesterday for me(without admin)
i can not measure or solder remotely.
Dear blogger, please do not misunderstand my meaning. I am just disappointed and have not had the opportunity to learn your skills. Can you send me your system download address? I want to install the same system
windows 10 pro. just runs default normal user, not admin account like yours.
have you maybe a supermicro X11 around to test the MC2221a device ? maybe the outputs brocken by wrong connection(red +3.3. to SDA, black ground to SCL.
I welded again and measured the voltage to be 3.0V. I opened the non administrator cmd in the task manager, but still detected an error. I plan to try purchasing MCP2221A again.windows 10 pro. just runs default normal user, not admin account like yours.
have you maybe a supermicro X11 around to test the MC2221a device ? maybe the outputs brocken by wrong connection(red +3.3. to SDA, black ground to SCL.
if renesas ISL controller like on CX2550 M4 buy renesas USB dongle and use vendor software.
if you look at 82xx/62xx support, you need first BIOS support for 2ng gens.
Congratulations on your success, can you teach me? I have successfully welded it, but I have been unable to find PXE1610C in my search
don't know if important but
I saw that your MCP2221a LED is red, while mine lights green.
Last edited:
Thank you for providing the clue. The problem may be with MCP2221a! I have already sent the motherboard to a capable teacher to crack it, hoping for good news! Thank you.
His MB is sending to me, i will try my best to solved his problom Oh yeah right, I overlooked that the M4 does not support 2nd gen.
As you may have seen in my FS / WTB thread, I'm looking for two cheap 1U barebones for an experiment (should use 8259CL, 1U, ideally single socket, more or less compact and cheap).
System with Supermicro X11SPW would be ideal (I assume VRMs could be flashed), but no good offers
Intel R1208WFTYS with S2600WFT seem quite cheap, maybe I'll use one of those.
His problom been solved,the result is his MCP2221A device was broken being caused his every move were failed.
My laptop connect his MCP with 000000000 device id.
