Hi,
I Just have received my new Supermicro H12SSL-i MB to build my home server. Unfortunately seems that my system is broken as I am not able to start the machine.
After I turn on the power supply the LE1 LED blinks quickly until the LEDM1 (BMC) starts to blinks quickly and then if off. The BMC then goes in the heart beat mode that I find normal from manual, however the LE1 should stay lit.
I have access to BMC through IPMI interface, but the CPU and the RAM amount is not correct as I am using Epyc 7262 and 4x Samsung 3200 stick’s. I need to mention that I have re-seated the CPU several times.
Anyone ahs any idea what might be wrong?
Thank you for your support.
I Just have received my new Supermicro H12SSL-i MB to build my home server. Unfortunately seems that my system is broken as I am not able to start the machine.
After I turn on the power supply the LE1 LED blinks quickly until the LEDM1 (BMC) starts to blinks quickly and then if off. The BMC then goes in the heart beat mode that I find normal from manual, however the LE1 should stay lit.
I have access to BMC through IPMI interface, but the CPU and the RAM amount is not correct as I am using Epyc 7262 and 4x Samsung 3200 stick’s. I need to mention that I have re-seated the CPU several times.
Anyone ahs any idea what might be wrong?
Thank you for your support.
Attachments
-
235.4 KB Views: 45
-
187.6 KB Views: 46
-
30.2 KB Views: 45
-
40.2 KB Views: 41
-
248.9 KB Views: 39
-
172.9 KB Views: 34