EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen
- Thread starter flobert
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Im try press this button multiple times but nothing happen(visual nothing change)... Now I see that it add new policies to list...
Thanks for this hint...
I think I have another strange issue...
Im enable power on state after power loss in BIOS. If I shutdown motherboard and remove power cable from it and then reconnect it back motherboard start and it stuck in D7 state. In BMC remote it do not react on any key press... Then I need to restart it by BMC and it boot normaly...
Any idea what can be wrong?
Im enable power on state after power loss in BIOS. If I shutdown motherboard and remove power cable from it and then reconnect it back motherboard start and it stuck in D7 state. In BMC remote it do not react on any key press... Then I need to restart it by BMC and it boot normaly...
Any idea what can be wrong?
if the code is counting BIOS waits for BMC init.completed.
D7 no console input device found.
you may configure the BIOS to proceed without kbd
can also be the infamous gigabyte D7 bug. reflash BIOS and clear CMOS helps a while...
do you use the USB2.0 ports for kbd ? if yes try to use the USB3.0 instead, i found many reports this helps (gigabyte AMD motherboards)
this is for the case you have disabled BMC. they talk together at POST.
so you have to enable this because the BIOS wants the console input device(KVM)
I don't use keyboard and will not be used. If I would like use keyboard then I will not need BMC...
BIOS update went without issue and after flash from F06(If remember correctly it came with F06) to F13 Im set by BIOS settings to defaults.
It happen only first time after power loss then after shutdown/reboot work ok(Probably because BMC insert HID keyboard and mouse)... Im re-enable "Wait for BMC" function in bios and set 2 minutes(I think this is default value) I want fast boot after power loss so I disable this option to speed up powering on... Now I need to test this... Tomorrow I will install it in rack and will know if this fix issue...
BIOS update went without issue and after flash from F06(If remember correctly it came with F06) to F13 Im set by BIOS settings to defaults.
It happen only first time after power loss then after shutdown/reboot work ok(Probably because BMC insert HID keyboard and mouse)... Im re-enable "Wait for BMC" function in bios and set 2 minutes(I think this is default value) I want fast boot after power loss so I disable this option to speed up powering on... Now I need to test this... Tomorrow I will install it in rack and will know if this fix issue...
you loose functionality. the BIOS and BMC interact/exchange data at POST.
works
5600X comes VMR-B0 later in VMR-B2 stepping
afaik 5600 comes only in VMR-B2 stepping - not avail at script of QVL thought.
checked the BIOS, you need at least BIOS F11(can be updated by BMC)Thanks for the prompt responce. Thats good as I have already ordered both
F06 doesn't contains B2 microcode.
can be strange, one 5600x(B0) works but other 5600X(B2) not.