If the board only has one socket, then ofcourseWill the 2s run on single socket?
You can only overclock by Software.Hi, after setting my overclock in the bios, I'm unable to get past postcode 60.
CPU: 2S1404E2VJUG5
MB: h11ssl-i rev 2
RAM: 16GB PC4-2400T HMA82GR7MFR8N
Stock settings i think.@fobus what are your settings in bios ?? cTDP and Package Power Limit (ppt).
https://forums.servethehome.com/ind...y-overclocking-epyc-rome-es.28111/post-259693 ExecutableFix told us that with Above 4g deocding ZS CPUs wont work.try to ENABLE above 4g decoding
and maybe LOCAL APIC MODE to x2apic
No. Windows. Was Windows. I can't even setup Windows now. System hangs during installation of Win. I'm stuck with no OS for now...fobus, are you on linux? You need to load a kernel module first (long shot as your probably on windows)
What version of windows are you using, I had issues especially with smt on getting 2x64core to boot windows until it was completely update and using pro for workstation. Test in Linux to make sure it works fine first.So there are some problems with CPUs i think. Investigation showes us that there are no way to get them work with more than 4 CCDs. Why they are so slow - don't know, but hangs and restarts are start to happen with more than 4 CCDs are active.
FAILED
FAILED
FAILED
PASSED
PASSED
Windows 10 Enterprise. It supports 256 threads as i know.What version of windows are you using, I had issues especially with smt on getting 2x64core to boot windows until it was completely update and using pro for workstation. Test in Linux to make sure it works fine first.
Win 10 Enterprise boots well from m2.nvme. Problems are happened with more than 4 CCDs. Even if I set 6 CCDs with 1+1 core each it hangs.for sure, windows 10 enterprise supports 128 cores/256 threads when x2apic enabled (apic local mode set to x2apic). my cpu's are 7742 oem. i dont know about zs-serie's
when i was installing win 10 enterprise on m2.nvme i couldn't get win10 booted. i could installed on m2.nvme, but not booted.
i went 2,5inch-ssd-way.
@fobus maybe your cpu's are partially broken because they are ES/QS ??