No contest ! S3500 over mx500 imho any day of the week.Trying to decide between getting two of these or the crucial mx500 500gb for the same price to run some home vms.
No contest ! S3500 over mx500 imho any day of the week.Trying to decide between getting two of these or the crucial mx500 500gb for the same price to run some home vms.
Great thank you. I figured as much just wanted to verify with the datastore guys. Order placed.No contest ! S3500 over mx500 imho any day of the week.
Nearly always the case that enterprise drives will run rings around consumer on anything but the lightest workload. For sata that’s for me that’s intel like these or I am partial to the sm863/pm863 from Samsung mainly because of the value for money on the pm863 and larger sizes, recently though with the firmware issues others have been having with Samsung It’s made me think twice and do see intel as being better in this regard.Great thank you. I figured as much just wanted to verify with the datastore guys. Order placed.
martctl 6.6 2017-08-08 r4433 [x86_64-linux-6.7.0] (daily-20170808)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs
Device Model: INTEL SSDSC2BB800G4T
Serial Number: <removed>
LU WWN Device Id: 5 5cd2e4 04b6cc3e8
Add. Product Id: DELL(tm)
Firmware Version: D201DL13
User Capacity: 800,166,076,416 bytes [800 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed May 9 21:22:38 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 60) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 189139
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 24811
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 38
13 Read_Soft_Error_Rate 0x0032 130 100 000 Old_age Always - 124554240723
179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 7986
181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 639952093821
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 921
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 86
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1479929
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 588866
245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 21 -
# 2 Extended offline Completed without error 00% 20 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
As much as the S3500 might be a better fit performance wise, buying new drives with warranty may still be warranted sometimes ... (what a pun!)Great thank you. I figured as much just wanted to verify with the datastore guys. Order placed.
# smartctl -a /dev/da15
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SSDSC2BB480G4I 00AJ331 00AJ334IBM
LU WWN Device Id: 5 5cd2e4 04b4ad5b4
Firmware Version: D201NB34
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri May 18 17:53:59 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 148
5 Reallocated_Sector_Ct 0x0033 097 097 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
13 Read_Soft_Error_Rate 0x001e 130 100 000 Old_age Always - 148
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 5971
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4
177 Wear_Leveling_Count 0x0032 100 100 --- Old_age Always - 1
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 56
190 Airflow_Temperature_Cel 0x0026 068 059 029 Old_age Always - 32 (Min/Max 23/35)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 21
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 471663
196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 112
231 Temperature_Celsius 0x0033 100 100 010 Pre-fail Always - 0
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 128898768
233 Media_Wearout_Indicator 0x0033 100 100 001 Pre-fail Always - 0
235 Unknown_Attribute 0x0033 100 100 001 Pre-fail Always - 659
237 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4294967955
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 256
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 640
SMART Error Log Version: 1
ATA Error Count: 38 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 38 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
12 01 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:11:11.102 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00:11:11.100 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:11:10.852 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:11:10.852 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 00:11:10.852 SET FEATURES [Set transfer mode]
Error 37 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
12 01 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:09:36.074 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:09:35.198 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:09:35.197 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 00:09:35.197 SET FEATURES [Set transfer mode]
ef 03 0c 00 00 00 00 00 00:09:35.197 SET FEATURES [Set transfer mode]
Error 36 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
12 01 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:09:32.319 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:08:48.267 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:08:48.267 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 00:08:48.267 SET FEATURES [Set transfer mode]
ef 03 0c 00 00 00 00 00 00:08:48.267 SET FEATURES [Set transfer mode]
Error 35 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
12 01 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:08:41.726 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:08:40.529 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:08:40.529 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 00:08:40.529 SET FEATURES [Set transfer mode]
ef 03 0c 00 00 00 00 00 00:08:40.529 SET FEATURES [Set transfer mode]
Error 34 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
12 01 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:08:37.575 IDENTIFY DEVICE
b0 d0 00 00 4f c2 00 00 00:08:36.582 SMART READ DATA
ec 00 00 00 00 00 00 00 00:08:36.582 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable read look-ahead]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 00 00 00:08:37.575 IDENTIFY DEVICE
b0 d0 00 00 4f c2 00 00 00:08:36.582 SMART READ DATA
ec 00 00 00 00 00 00 00 00:08:36.582 IDENTIFY DEVICE
ef 02 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable read look-ahead]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
That's a bit fishy, especially the power on hours (0?). The errors are no good, it seems to be having issues negotiating speed and other commands. Change the cable and port if you can and retest, also with another drive known to be working well...One of the two drives has errors in the SMART data. Is this serious and should i return the drive?
Code:# smartctl -a /dev/da15 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSDSC2BB480G4I 00AJ331 00AJ334IBM LU WWN Device Id: 5 5cd2e4 04b4ad5b4 Firmware Version: D201NB34 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 18 17:53:59 2018 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 148 5 Reallocated_Sector_Ct 0x0033 097 097 001 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7 13 Read_Soft_Error_Rate 0x001e 130 100 000 Old_age Always - 148 100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 5971 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4 177 Wear_Leveling_Count 0x0032 100 100 --- Old_age Always - 1 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 56 190 Airflow_Temperature_Cel 0x0026 068 059 029 Old_age Always - 32 (Min/Max 23/35) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 21 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 471663 196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 112 231 Temperature_Celsius 0x0033 100 100 010 Pre-fail Always - 0 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 128898768 233 Media_Wearout_Indicator 0x0033 100 100 001 Pre-fail Always - 0 235 Unknown_Attribute 0x0033 100 100 001 Pre-fail Always - 659 237 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4294967955 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 256 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 640 SMART Error Log Version: 1 ATA Error Count: 38 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 38 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 12 01 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:11:11.102 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00:11:11.100 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:11:10.852 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:11:10.852 SET FEATURES [Enable read look-ahead] ef 03 46 00 00 00 00 00 00:11:10.852 SET FEATURES [Set transfer mode] Error 37 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 12 01 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:09:36.074 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:09:35.198 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:09:35.197 SET FEATURES [Enable read look-ahead] ef 03 46 00 00 00 00 00 00:09:35.197 SET FEATURES [Set transfer mode] ef 03 0c 00 00 00 00 00 00:09:35.197 SET FEATURES [Set transfer mode] Error 36 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 12 01 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:09:32.319 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:08:48.267 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:08:48.267 SET FEATURES [Enable read look-ahead] ef 03 46 00 00 00 00 00 00:08:48.267 SET FEATURES [Set transfer mode] ef 03 0c 00 00 00 00 00 00:08:48.267 SET FEATURES [Set transfer mode] Error 35 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 12 01 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:08:41.726 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:08:40.529 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:08:40.529 SET FEATURES [Enable read look-ahead] ef 03 46 00 00 00 00 00 00:08:40.529 SET FEATURES [Set transfer mode] ef 03 0c 00 00 00 00 00 00:08:40.529 SET FEATURES [Set transfer mode] Error 34 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 12 01 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:08:37.575 IDENTIFY DEVICE b0 d0 00 00 4f c2 00 00 00:08:36.582 SMART READ DATA ec 00 00 00 00 00 00 00 00:08:36.582 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable read look-ahead] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 00 00:08:37.575 IDENTIFY DEVICE b0 d0 00 00 4f c2 00 00 00:08:36.582 SMART READ DATA ec 00 00 00 00 00 00 00 00:08:36.582 IDENTIFY DEVICE ef 02 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable write cache] ef aa 00 00 00 00 00 00 00:08:36.547 SET FEATURES [Enable read look-ahead] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I received mine today from this listing, 8GB written on each drive, only 6 power cycles, and 0 recorded power on hours. Not sure if the hours is incorrect but the 8GB written matches the wear values.
No it was one listed in a subsequent post in this thread.@Nik What seller? The one in OP?