I have dual E5-2697 v2 now but the single core performance just too low and multiple core adds up the power consumption is worst than A single i9-12900K, and unfortunately my case single core performance is significant, so I am wondering if there is something will go terribly wrong that I don’t...
I am hoping someone here can help give me a lead on what memory to purchase for my supermicro X11SSL based NAS. I am trying to find a 64Gb kit and coming up empty. I am scowering the internet (eBay, PCPP) but the only kits I have found are fully buffered, out of stock, or extremely expensive...
Once I get my processor, I was going to get one of the Supermicro boards (H12SSL-CT) and throw in a lot of memory.
I started doing the research on memory and found that Crucial only had the H12SSL-NT board for compatibility which I think is close enough...
I am looking for either four (4) 16GB or 4 x 32GB DDR4 ECC ram modules that are preferably on the motherboard's QVL list so Samsung M391A4G43MB1 / M391A2K43DB1 or Kingston KSM26ED8.
I'd prefer local (Baltimore/Washington Area) but certainly also open to have them shipped here. If anyone has a...
I need to urgently upgrade ram but is more difficult find this type, mainboar is old.
4x 204-pin DDR3 SO-DIMM socket
Supports up to 64GB DDR3 ECC Un-Buffered memory
1600/1333MHz ECC DDR3 SDRAM, 204-pin gold-plated DIMMs
I need to match the following trifecta and make them play nice together:
- motherboard: Supermicro X11SPM-TF
- CPU: Intel Xeon Silver 4114 SR3GK 10-Core 2.20GHz 13.75MB LGA3647 CPU
- memory module: Supermicro Certified MEM-DR464L-HL03-LR26 Hynix HMAA8GL7CPR4N-VK 64GB DDR4-2666 ECC...
I have built a machine with 2 AMD Epyc 7282 CPUs on a Supermicro H11DSi board. It has 8 RAM slots per socket. I have 8 sticks of 16GB DDR4-3200 registered ECC memory, that is 4 sticks per socket.
The problem I'm having is - when the system is fully assembled multiple benchmarks show...
No longer for sale - someone reached out and purchased the whole lot. Thanks all!
I have various PC3L DDR3 ECC DIMM modules for sale:
(50) 16GB 2Rx4 PC3L-12800R - most are Samsung/Cisco, several SK Hynix all same spec/server pulls $17/ea
(8) 8GB 2Rx8 P3L-12800R - All Samsung --...
I am specifically targeting MBD-M11SDV-4C-LN4F-O and MBD-M11SDV-8C-LN4F-O for use in my homelab environment and would absolutely target ECC modules - any guidance which to choose? Even better if existing users of these EPYC 3000 boards chime in.
- for MBD-M11SDV-4C-LN4F-O -> I...
Selling a lot of server 8GB RDIMMS PC3-10600R and PC3-12800R. They should all be functional. These are recent server pulls, but please make sure they are compatible with your system before buying, as they are being sold as-is.
Listed quantities available below:
x2 Micron 8GB 10600R with...
Hi , i am a student i am planning to build a freenas for my home data backup and plex purpose . Can anyone suggest me any power efficient processor for this build . suggest anything except atom c servers processors .
Please suggest some processor which supports ECC memory . And not a Atom...
Trades interested in:
rtx 2080 ti with better then stock cooler
2 x e5-2680 V4 CPU or higher
Heatware: under marcoi
Paypal: Premier and Verified
For Sale Rules:
All items are sold as is with no warranty, unless otherwise stated. I listed...
I have to add new ram, but I can not find the one requested by the producer (and not even the model I already use "Hynix 8 GB ECC DDR3 SO-DIMM HMT41GA7BFR8A-PB" x2 module ) do you have any suggestions? can i mix ram?
I have an Intel S2600CP system board and looking to upgrade my RAM from 32GB to 64GB. The problem is my current RAM has 2 stickers on it (pictures below). I understand Crucial is owned by Micron, but am I relegated to only this brand of memory? I've been shopping for cheaper 8GB sticks...
I have a client who is buying a 1U single socket Supermicro server with an Epyc 7351P 16 Core processor. The application is as a small Proxmox host, running Debian VM instances for clients.
The intention is to run about 40 VM's at 128GB of RAM (32GB modules), but retaining the option...
I've got a bunch of stuff that I've been amassing for a while now that I'd like to get rid of. I am located in Richmond, VA and am willing to ship (preferably not the server, but will if I have to), but shipping is not included in the prices listed. I am willing to accept Paypal only...