I get this Linux boot-error on all my SuperMicro X11 boards (chipset C236)
[ +8.162342] intel_ish_ipc 0000:00:13.0: [ishtp-ish]: Timed out waiting for FW-initiated reset
[ +0.010041] intel_ish_ipc 0000:00:13.0: ISH: hw start failed.
The device is:
00:13.0 Non-VGA unclassified device: Intel...
I am trying to figure out a way to set up 2 seats on one computer. I know it is possible but I have a really hard time to figure out what is the best way for my use case, what are the benefits or what are the trade-off.
Here is what I would like to do: a 2 dynamic attribution of resources seats...
Hi everyone,
Haven't been here for a while.
Have a strange question , maybe?
I have a Proxmox 5.4 server setup on ZFS.
The setup is as follows:
A system is on 2 SSD in mirrored pool
And around 16 HDDs of various sizes in mirrored pools based on disks size. Like I have a pool with 2T disks. A...
Hi!
After spending a lot of time reading valuable sources such as STH, I spent the last 3 months slowly incubating my new file server. I am unfortunately quite disappointed by the performance of the resulting system.
I apologize for the long post, but I will try to give all relevant info that...
Hi, I just built a system with a 7282 and an Asrock Rack EPYCD8-2T.
It seems to be rock solid with Lubuntu 18.04 but here are a couple of question I really hope you could answer since I'm driven crazy with them.
1. OS-independent: I just cannot manage to have the IPMI working over the...
Being using ZFS since it's out and using Solaris/OpenSolaris/OmniOS for my centralized storage server for a few years. The storage server provides VMware datastore through NFS mainly, some iSCSI (used to do FC) for specific applications, then NFS/SMB for other servers and workstations at home...
Hi, I am wanting to upgrade my current home server to something that doesn't use Windows and am having a crisis with choosing what I am going to do. Here are my list of things that I need as well as some prefered things
Required:
GUI for 90% of tools that I will be using (I can do some things in...
I’m working on a home server project using a Dell R720 to serve as a NAS, PLEX server, and torrent grabber. This is my first server ever and my first experience in networking, server hardware, and Linux. Because of this, I do not know how to carry out the three functions listed out above so I’m...
So I have taken the plunge and am building a Linux lab server around a E2100 Xeon. I have six 8TB SATA drives that I plan to put into a ZFS RaidZ2 pool. I am considering adding some L2ARC and ZIL/SLOG cache to increase IOPS and I have a 240GB M2 SSD (Corsair MP510) for that. To complete the...
Hello everyone,
I am new to the forum, and I don't know if this is the right place to post this here.
I am looking to build a storage server for my studio, which I will be using for a few applications.
I would like to know what kind of OS and setup should I use. I don't know much Linux commands...
I'm looking for a 970 PRO NVMe alike drive with real Linux support!
Samsung says their drives are working on Linux but are only optimized for Windows performance and their firmware update tool only runs on Windows.
Shouldn't we punish them by not buying their drives until they change their...
Hello, I've been using Virtualmin for a while and i cant seem to find a forum that is active enough to learn something new.
If anyone has been using Virtualmin for a while on a host like Digitalocean and whatnot, you come to realize that storage space is a problem.
Unless you want to be...
This project started out as a budget project to reuse old equipment that I had stashed around the house.
This was the spec I started with:
Gigabyte MA-790FXT-UD5P
AMD Phenom II X4 955
Corsair Dominator 4GB 1600
128GB Samsung OEM SSD
Nvidia Quadro FX3500
LSI MegaRaid SAS 8888ELP
Belkin USB 3.0...
Upgrading parts of my homelab and doing some storage tests using sysbench:
sysbench --test=fileio --file-total-size=64G prepare
sysbench --test=fileio --file-total-size=64G --file-test-mode=rndrw --max-time=300 --max-requests=0 run
sysbench --test=fileio --file-total-size=64G cleanup
I'm...
Hello Lovely internet land.
I'm currently configuring:
Dell R510, Ubuntu 18.04 with a Mellanox ConnectX-2 (2x SFP+)
|| (SFP+)
LB8
|| (SFP+)
LB4m ---[Cat5e]--- WiFi AP ->) (<- Laptop
| (Cat5e)
Router
I have my Internet coming into a port on a LB4m which goes into a Bonded Pair of SFP+ which...
Has anyone here used zswap on their servers? I've been hunting for information comparing zswap performance to zram (which I've used heavily) but I can't seem to find much beyond high level comparisons between the two.
I'm interested because zswap avoids the LRU inversion problem that zram seems...
Hello,
I have a X11SAT-F motherboard with IPMI support running linux under EFI mode. I want to use SOL for the remote server. I appended the kernel command line to the following,
linux /@/vmlinuz-4.9.95-gentoo root=ZFS=rpool/ROOT/gentoo ro spl.spl_hostid=0xa8c06f01 console=tty0...
Hello STH forum, I have a question about running Windows on Proxmox because this is giving me a bad time so far. I'm asking here at STH first because it seems to me there is more technical knowledge on STH than on the Proxmox forums.
Some relevant specs of the box I'm running this on:
Intel...
Hi Guys,
I have proliant 380p's and want to setup each server to do the following tasks.
Run a computationally intensive app that will utilise 95% of the CPU's resources (machine learning / AI), the rest of the CPU power will be used for the following:
Run 16 virtual machines that will need...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.