thats the QWATthen I want to ask if I buy, for example, this model Intel Xeon Platinum 8368 ES
the motherboard will work on BIOS version 1.4?
i have it on X11SPM BIOS 1.6 - was latest that time
thats the QWATthen I want to ask if I buy, for example, this model Intel Xeon Platinum 8368 ES
the motherboard will work on BIOS version 1.4?
nothing you need.Guys, please tell me where I can get it CPLD
and these are the drivers for the motherboard?nothing you need.
supermicro will provide you it IF an update is required.
no that is the Firmware for the CPLD( "Complex Programmable Logic Device" ) chip on the motherboardand these are the drivers for the motherboard?
connected to BMC LAN ? this is at stock config not accessible with OS, only for remote.but the Internet does not work, it says unidentified network
Thanks for the answerconnected to BMC LAN ? this is at stock config not accessible with OS, only for remote.
use other 2 1GbE LAN ports.
if you still use these two your router may not support 1GbE.
only if problems(never change a running system)Another question.
What should be the system update sequence?
Bios-first and after BMC or BMC-first and Bios
wait longer to complete windows background processes.Now I'm faced with a new problem: for some reason the processor is running at full power in stock and the memory frequencies are not displayed
BIOS Date: 01/03/2024 Ver 1.9
BMC 01.03.11
I already realized this a few hours ago when I tried to reflash it through Afudos and sewed the Shellnote on X12/h12 systems only the BMC can flash Firmware,
you mostly brick the board with AFUxxx. read the notes, ther is a warning/note from supermicro.I already realized this a few hours ago when I tried to reflash it through Afudos and sewed the Shell
Yes, my router supports to 2.5GbE i have optical i-net connectionconnected to BMC LAN ? this is at stock config not accessible with OS, only for remote.
use other 2 1GbE LAN ports.
if you still use these two your router may not support 1GbE.
remove the cable from BMC LAN(should not avail. in public)I tried to update BMC and BIOS as in the picture, v 1.6 but the problem was not solved
device-manager ? intel NIC drivers correct installed ?Yes, my router supports to 2.5GbE i have optical i-net connection
and cables are connected correctly
all drivers are installed to the latest versiondevice-manager ? intel NIC drivers correct installed ?
edit:
LAN Port Enable/Disable Jumper ???
still no device manager access ?all drivers are installed to the latest version
Today at some stage of the installation there was internet for a while, but when I rollback to 1.6 the internet stopped working, I tried updating to the latest version with no resultsstill no device manager access ?
if there is a problem it will be reported. if no problem, cable or NIC defective = RMA board.