X12SPL-F Failing to boot after Bios

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

John Burns

Member
Jul 12, 2016
93
27
18
43
Iowa, USA
on the cpu cooler? Yes.

Now after trying Bios 1.4B i get a different error in the health log. [PC-0001] Configuration error - CPU 1 PCU Unknown Fatal error(Current Boot error) - Assertion

Still fails on the same spot. I think this means the CPU is faulty.
 

AVID-MEDIA

Member
Nov 26, 2023
120
17
18
Hi guys, I have exactly the same problem, I use an MOBO X12SPL-F CPU-8360y ES I sent it to supermicro for repairs. After the system was repaired, it won’t start. I wrote to technical support and they explained to me that they made an update and my processor cannot work in new update because it is an ES.
All I have to do is unsolder the chip and load BIOS version 1.0
Please tell me where the BIOS is located on the motherboard
1708264001126.png
 

AVID-MEDIA

Member
Nov 26, 2023
120
17
18

RolloZ170

Well-Known Member
Apr 24, 2016
5,422
1,637
113
If I understand correctly, you need to unsolder the chip, solder the SMT Socket - Wide SOIC, and then insert the BIOS chip
you need to replace the chip in any case. you can not flash in circuit on X12 (you will brick the board)
 

RolloZ170

Well-Known Member
Apr 24, 2016
5,422
1,637
113
I use an MOBO X12SPL-F CPU-8360y ES I sent it to supermicro for repairs. After the system was repaired, it won’t start. I wrote to technical support and they explained to me that they made an update and my processor cannot work in new update because it is an ES.
All I have to do is unsolder the chip and load BIOS version 1.0
BIOS 1.0 is full of bugs:
wouldn't it be better you switch to stepping D0 ES ?
QWAT,QWAQ,QWAS,QWAP