Ok so finally got everything setup today. That took awhile! It still is not pretty and thank you @Marsh for stopping by and helping rack a few boxes that already got upgraded since starting the process.
Machines installed, turned on and with either Ubuntu or Proxmox installed and other connected devices
Networking
Compute Nodes
Dual socket 2U
Other
Summary: 3 switches including 1x 10Gbase-T, 11 server nodes (stretching that a bit with the NUC but OK), 2x Lantronix Spiders.
The question: How much power is this drawing as measured by the Tripp Lite PDU?
Hint - this is on a 15A @ 120v circuit.
Vote and then put your guess in the reply to this thread. I am going to ask that @Marsh you can vote but since you saw the number yesterday, please do not put your guess in this thread.
I will post actual figures on Friday.
Machines installed, turned on and with either Ubuntu or Proxmox installed and other connected devices
Networking
- 2x HP V1910-24G gigabit network switches
- 1x Dell PowerConnect 8132 24-port 10Gbase-T (no uplink cards)
Compute Nodes
Dual socket 2U
- 2U Intel server -
- Dual Intel E5-2699V3,
- 128GB DDR4,
- Fusion-io ioDrive SLC 160GB,
- 6x SATA SSDs - 2U Supermicro 24-bay server -
- Dual Intel E5-2698 V3,
- 128GB DDR4,
- 2x Fusion-io ioDrive MLC 353GB,
- 5x 15k rpm 12gb SAS3 300GB drives, 3x HGST 400GB SAS2 SSDs, 6x SATA SSDs,
- add-in SAS3 controller,
- add-in dual 10Gbase-T controller - 2U ASRock in a Supermicro chassis -
- Dual E5-2695 V3,
- 128GB DDR4,
- 3x 4TB 7200RPM WD RE drives, 2x 800GB Sandisk CloudSpeed Ascend, 2x Intel - DC S3500 160GB, 2x 240GB scratch SATA SSDs
- 1U Proxmox node
- Xeon E3-1125C
- 32GB,
- 2x SATA SSDs - 1U Dell PowerEdge R220/ DL1000
- E3-1220 V3,
- 16GB RAM,
- 2x SATA SSDs - 1U Supermicro Proxmox Node
- C2750,
- 32GB RAM,
- 2x 960GB SanDisk CloudSpeed Eco - 1U Supermicro pfsense node
- Atom C2758
- 8GB RAM,
- 2x SSD - 1U ASRock based C612 mITX
- Dual Intel E5-2695 V3,
- 16GB DDR4 Innodisk SODIMM
- 2x 480GB SATA SSD + 2x 1TB WD Red 2.5" drives
- Proxmox Node
- Intel Xeon D-1540
- 32GB
- 2x 400GB S3700 + 1x 180GB 530 SSD - Supermicro SYS-5028D-TN4T
- Intel Xeon D-1540
- 128GB DDR4
- 2x WD Red 4TB drives and 4x SATA SSDs - Intel Core i5 NUC (aka the mode of last resort)
- Intel Core i5-3472U
- 8GB RAM
- mSATA SSD
Other
- 2x Lantronix Spider KVMs
Summary: 3 switches including 1x 10Gbase-T, 11 server nodes (stretching that a bit with the NUC but OK), 2x Lantronix Spiders.
The question: How much power is this drawing as measured by the Tripp Lite PDU?
Hint - this is on a 15A @ 120v circuit.
Vote and then put your guess in the reply to this thread. I am going to ask that @Marsh you can vote but since you saw the number yesterday, please do not put your guess in this thread.
I will post actual figures on Friday.
Last edited: