Inspur-branded LSI9300-8i for $50
- Thread starter piranha32
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I followed instructions to update the firmware, I was unable to do this from UEFI shell, so did it from Windows environment. It flashed fine, no errors and I can see the drives, but when I try sas3flash -list from the same Windows enviroment, I get the message that there are no Avago controllers in the system. Device manager shows the card, and when I boot, I see Avago Bios screen without any issue. What should I do so that it shows up from sas3flash?
So I recently purchased 2 of these (they were down to like $22? us) and flashed them both up, one from UEFI and one from inside Megaraid. They both came with fw version 12 and in IT mode.
On my ancient datto box I had to do the 'cover pin 3 thing' to ever see the card in UEFI. I noticed that the latest UEFI version of sas3flash stops finding the cards afterwards (have not looked into this yet) though, but MegaRaid in linux, and windows still sees the cards fine.
sas3flash-x64 works fine in windows10 *IF* I remember to give the command prompt administrative access. (I'm not using serverXX)
Otherwise... no Avago adapters found. Be sure to check your rights.
D:\raid>sas3flash.exe -list
Avago Technologies SAS3 Flash Utility
Version 17.00.00.00 (2018.04.02)
Copyright 2008-2018 Avago Technologies. All rights reserved.
Adapter Selected is a Avago SAS: SAS3008(C0)
Controller Number : 0
Controller : SAS3008(C0)
PCI Address : 00:84:00:00
SAS Address : 56c92bf-0-0050-1d02
NVDATA Version (Default) : 0e.01.00.07
NVDATA Version (Persistent) : 0e.01.00.07
Firmware Product ID : 0x2221 (IT)
Firmware Version : 16.00.12.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9300-8i
BIOS Version : 08.37.00.00
UEFI BSD Version : 18.00.00.00
FCODE Version : N/A
Board Name : INSPUR 3008IT
Board Assembly : INSPUR
Board Tracer Number : N/A
Finished Processing Commands Successfully.
Exiting SAS3Flash.
I mean to try and get one into -IR mode but I haven't started into that yet.
Last edited:
wow that's cheap. I don't see a listing, was that an accepted offer?
Also, does anyone have an angle on really cheap dual port SAS cables that woud work with this card? Trying to eke the most performance out of a SAS SSD but the cables are like $40 or $50 or more by themselves and hard to find.
You know you're all about the STH effect when $1 upsets you.
And I'm right there with you!Did you already try it?
I am trying to crossflash one of this card IT to IR for the last two days. Found a huge guide with all you need to know about it here:
Detailed newcomers' guide to crossflashing LSI 9211/9300/9305/9311/9400/94xx HBA and variants
There's hundreds of threads on crossflashing variants of LSI 9211/9300/9305/9311/94xx cards here, on ServeTheHome, and on blogs. But they don't always discuss the subtleties of doing it on an EFI board for users who may never have used EFI...
www.truenas.com
But I can't find INPUR IR firmware anywhere to do first step (is it necessary or could be skipped?).
Could anyone confirm successful flash IT -> IR firmware for this particular Inspur LSI9300-8i yzca-00424-101 (ypcb-00424-1p2) card?
Repeat after me: I don't need more controllers, I don't need more controllers, I don't need more controllers
Somewhere in this thread there's a link to low profile brackets. They're dirt cheap, I bought a lot of 5 of them.
I actually did a quick search and didn't seem to find a post in this thread about the source of the brackets.
This is them. They fit perfectly.I actually did a quick search and didn't seem to find a post in this thread about the source of the brackets.
5Pcs Low Profile Bracket for M1015 M5015 LSI 9210 9211 9265 9271-8i P420 P410 US | eBay
We keep our promises that we will provide you with the best solution within 24 hours.
www.ebay.com
Thank you!This is them. They fit perfectly.
5Pcs Low Profile Bracket for M1015 M5015 LSI 9210 9211 9265 9271-8i P420 P410 US | eBay
We keep our promises that we will provide you with the best solution within 24 hours.www.ebay.com
What is the link? It cannot go lower than that I assumeYou guys are killing me, I could resist no longer...I'm in for 2 at $12.99 accepted offer
Are the any difference between these cards and hp h240 other than firmware? Speed should be same, I presume.
hp h240 is great card but it is a pain to manage them as they need custom hp software, they can be only used for HBA. Better buy 2 in case I ever want to use RAID.