IBM H1110 SAS Flashing Question

[tinybentley]

Hi,

I wanted to know how can I tell the firmware version of my IBM H1110, (

IBM 81Y4494 H1110 SAS-2 6Gbps HBA LSI 9211-4i P20 IT Mode

)
I believe it is in IT mode per the seller on ebay and I wanted to make sure it is flashed correctly. I am very new to the SAS controller world but have a working unraid system and can boot into linux if needed.

I want to get the card to the following state and was hoping someone here could help point me in the right direction or perhaps get on discord to walk me through it if you are feeling generous.

1. LSI Avago IT mode firmware version P20 (20.00.07.00)
2. MPTSAS2 BIOS ROM flashed version 07.39.02.00
3. MPTSAS2 UEFI ROM flashed version 07.27.01.01
4. Original SAS address preserved

 

[audiophonicz]

If its already in IT mode, you shouldnt need to crossflash it to LSI, it should still work with MegaRAID. Seems like unnecessary effort.

But since you asked: Cross-Flash IBM ServRAID M5110 and H1110 to IT HBA Mode – an Ephemeral Memoir of the Lazy Mocha

 

[tinybentley]

If its already in IT mode, you shouldnt need to crossflash it to LSI, it should still work with MegaRAID. Seems like unnecessary effort.

But since you asked: Cross-Flash IBM ServRAID M5110 and H1110 to IT HBA Mode – an Ephemeral Memoir of the Lazy Mocha

Thank you for the link