Firmware Version | V1.8 |
---|
Firmware Date | Nov 23 2023 |
---|
Hardware Version | HS72_V1.04 |
---|
NTP Server | SNTP Disabled |
---|
Current Time | ---------- |
---|
I can't seem to find the download firmware option in the UI. But here is the info of the newer FW. I managed to successfully change the IP of both my switches and save them.
I disconnected everything from the switch and used a
USB to Ethernet as the only device connected to the Hasivo switch connected to a laptop. I then edited the TCP/IPv4 under network connections in windows to same subnet and gave it an IP of 192.168.0.2 and subnet of 255.255.255.0 on the USB dongle. I managed to log into the default switch webpage at 192.168.0.1 after that every time without issues.
I copied over the mac address from the main page and set a DHCP static mapping from OPNsense to the IP of my choosing (192.168.68.100) in my case. I went back to the Hasivo web managed page and set my gateway and IP and hit "save". I waited until the top of the page had the error then plugged in the uplink from the main switch to the Hasivo.
I quickly reset the settings to automatic on the USB dongle in network settings again and did ipconfig /release and ipconfig /renew in command prompt. I went back on the new IP at 192.168.1.100 then went under tools -> save -> save. It managed to save and keeps the settings even after removing power from the switch!
Pretty happy with the switch so far. I'll be testing out a 2M HiFiber DAC with this newer FW next week to see if it works. Currently I have a 1M HiFiber DAC that works flawlessly.