Make sure to use UDIMM and no RDIMM memory. I could not find anything about M393A2K40DB1, but M393A2K40DB2 is RDIMM which is not working on this board.
EU Gigabyte Mainboard MC12-LE0 Re1.0 AMD B550 AM4 Ryzen
- Thread starter flobert
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
I have 45 w enabled, it works with bios f13, but option has moved to AMD overclocking and is called ecomode
F13 BIOS is now also available from Gigabyte Homepage.
I also received today a message that Gigabyte acknowledges that the iGPUs are not working and that they are working on a fix…
I also received today a message that Gigabyte acknowledges that the iGPUs are not working and that they are working on a fix…
NIce one, maybe you finally get that encode going
... FYI been doing some tests on ARC 380 ... it basically 2x what you get from even the fastest CPU based quicksync... it does 8x 1080p 10bit x265 encodes faster than my 5700x cpu does one hehe and idles at 1w when not encoding1W?
Honestly, I actually might not need the GPU power at all, as it’s video content for just me and my wife, who doesn’t watch movies without me - though 1 stream max, which can be handled via CPU.
even though the 1W for the A380 is really impressive, I do not want to waste a PCIe slot
Ok, I went through the options of "AMD Overclocking" after I just installed F13. But obviously I am blind, I see options to set voltage or frequncies static, but no "ecomode".
SMU Common Options has no ecomode available for me, all I can chose is "System configuration am4" which doesn't survive any reboot.
Also in the AMD Overclock section is no Ecomode. Could you please provide a screenshot. And XFR also doesn't offer an Ecomode:
(just set to manual, didn't applied any setting). The only way would be to set PTT TDC and EDC manually.
See also Post #263
I refern again to Post # 263:
"Advanced -> AMD CBS -> NBIO -> XFR": Only via manual set PPT, PDC and EDC (edit: didn't also work out as persistent)
"Advanced -> AMD CBS -> NBIO -> SMU -> System configuration": What ever TDP Setting I choose, it is not applied after reboot.
"Advanced -> AMD Overclocking"": No Ecomode or TDP setting
"Advanced -> AMD CBS -> NBIO -> XFR": Only via manual set PPT, PDC and EDC (edit: didn't also work out as persistent)
"Advanced -> AMD CBS -> NBIO -> SMU -> System configuration": What ever TDP Setting I choose, it is not applied after reboot.
Last edited:
I guess options change depending on the installed cpu
I use for archival only and with this :
no APU here 5700x, but should work on APU except it will be pci-e gen 3 not 4 i believe.. it's only 4x4x4x4 that doesn't work on apuSo your linked Aliexpress adapter allows to have an x8 PCIe slot + 2x NVME at full PCIe 4.0 x4 speed on the MC12-LE0 with an APU?
That would be nice to order...
These adapters are not always compatible