Gigabyte ga-7peslx fan speed

Discussion in 'Processors and Motherboards' started by hlhjedsfg, Aug 16, 2018.

  1. hlhjedsfg

    hlhjedsfg New Member

    Joined:
    Feb 2, 2018
    Messages:
    20
    Likes Received:
    4
    Hi,

    I got few Gigabyte ga-7peslx motherboard.

    I'd like to lower the fan speed (actually running stock fan of supermicro CSE-825 at 6000 RPM, pretty loud).

    I try the ipmitool raw commands of supermicro board, but it don't work's :

    Code:
    root@hv1:/home/alex# ipmitool raw 0x30 0x45 0x00
    Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x45 rsp=0xc1): Invalid command
    root@hv1:/home/alex# ipmitool raw 0x30 0x70 0x66 0x01 0x00 0x32
    Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xc1): Invalid command
    root@hv1:/home/alex# ipmitool raw 0x30 0x70 0x66 0x01 0x01 0x16
    Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xc1): Invalid command
    
    Do you know a tips to drive the fan speed on gigabyte motherboard ?

    Or can we show all raw possibility of the IPMI RAW (like a SNMP walk).

    Thank's a lot.
     
    #1
  2. hlhjedsfg

    hlhjedsfg New Member

    Joined:
    Feb 2, 2018
    Messages:
    20
    Likes Received:
    4
    Answer from Gigabyte support :

    After checking with the party in charge, we are sorry that the BMC does not support to adjust the fan speed.

    Regards,
    GIGABYTE

    That's litle disapointing for a motherboard with ASPEED 2400 !
     
    #2
Similar Threads: Gigabyte ga-7peslx
Forum Title Date
Processors and Motherboards Gigabyte GA-7PESLX Review Aug 13, 2012
Processors and Motherboards Anyone tried Gigabyte MZ32-AR0 motherboard in a Supermicro 213AC-R920LPB chassis? Nov 9, 2019
Processors and Motherboards Gigabyte MZ31-AR0 BIOS always start with “ROM Image is not loaded ROM Image updated denied" Oct 22, 2019
Processors and Motherboards Help! Gigabyte MZ31-AR0 no video Aug 2, 2019
Processors and Motherboards Gigabyte MZ31-Ar0 No Display/POST May 16, 2019

Share This Page