Hi there,
I recently bought a used supermicro x9-scm-f board from ebay. Altough i contacted the reseller for this issue i also want to try my luck on STH.
I cant seem to get this board running with this setup :
2 x 2gb PC10600E ECC UDIMM
Intel I3-2100 socket 1150 (Intel® Core™ i3-2100 Processor (3M Cache, 3.10 GHz) Product Specifications)
or
2 x 2gb PC10600E ECC UDIMM
Intel Xeon E3-1265L socket 1155 (Intel® Xeon® Processor E3-1265L v2 (8M Cache, 2.50 GHz) Product Specifications)
When the board is powered on, there is no beep. powersupply fan is running. also the processor-fan is running. Unfortunately this lasts only 5 seconds and then it all stops and this repeats endlessly without any signal on the VGA port.
I've managed get IPMI running and i was able to update the IPMI bios to the latest. unfortunately there is no way to update the bios from IPMI. The main reason for using the i3-2100 was to be able to update the bios to be able to use the xeon on this board.
There are two leds active on the board, the IPMI led and a powerled. I don't have any clue on what bios version is on the board right now.
Can anyone assist me with getting this board up and running ?
Thanks in advance
I recently bought a used supermicro x9-scm-f board from ebay. Altough i contacted the reseller for this issue i also want to try my luck on STH.
I cant seem to get this board running with this setup :
2 x 2gb PC10600E ECC UDIMM
Intel I3-2100 socket 1150 (Intel® Core™ i3-2100 Processor (3M Cache, 3.10 GHz) Product Specifications)
or
2 x 2gb PC10600E ECC UDIMM
Intel Xeon E3-1265L socket 1155 (Intel® Xeon® Processor E3-1265L v2 (8M Cache, 2.50 GHz) Product Specifications)
When the board is powered on, there is no beep. powersupply fan is running. also the processor-fan is running. Unfortunately this lasts only 5 seconds and then it all stops and this repeats endlessly without any signal on the VGA port.
I've managed get IPMI running and i was able to update the IPMI bios to the latest. unfortunately there is no way to update the bios from IPMI. The main reason for using the i3-2100 was to be able to update the bios to be able to use the xeon on this board.
There are two leds active on the board, the IPMI led and a powerled. I don't have any clue on what bios version is on the board right now.
Can anyone assist me with getting this board up and running ?
Thanks in advance