Hey everyone - great thread. Trying to convert an AP-315 but can't seem to get it on the network.
DHCP loops on retry - here are console snips:
APBoot 1.5.5.7 (build 56398)
Built: 2016-09-08 at 14:21:29
Model: AP-31x
DRAM: 491 MB
SF: Detected MX25U3235F with page size 64 kB, total 4 MB
Flash: 4 MB
NAND: 132 MiB
PCIE0: link up
PCIE1: link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0046 00002 00 00000004 00000000 00000000 00000000
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3at POE
In: serial
Out: serial
Err: serial
Net: eth0
Radio: qca9983#0, qca9990#1
Reset: cold
FIPS: passed
Hit <Enter> to stop autoboot: 0
apboot> printenv
bootdelay=2
baudrate=9600
autoload=n
boardname=Glenfarclas
servername=aruba-master
bootcmd=boot ap
autostart=yes
bootfile=ipq806x.ari
mtdids=nand0=nand0
ethaddr=48:4a:e9:c6:23:88
stdin=serial
stdout=serial
stderr=serial
machid=1260
mtdparts=mtdparts=nand0:0x2000000@0x0(aos0),0x2000000@0x2000000(aos1),0x4000000@0x4000000(ubifs)
partition=nand0,0
mtddevnum=0
mtddevname=aos0
ethact=eth0
Environment size: 387/65532 bytes
apboot> dhcp
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
DHCP broadcast 2
DHCP broadcast 3
DHCP broadcast 4
DHCP broadcast 5
Retry count exceeded; starting again
eth0: link up, speed 100 Mb/s, full duplex
DHCP broadcast 1
DHCP broadcast 2
DHCP broadcast 3
DHCP broadcast 4
DHCP broadcast 5
I manually set network configuration
apboot> setenv ipaddr 192.168.1.250
apboot> setenv gatewayip 192.168.1.1
apboot> setenv netmask 255.255.255.0
apboot> printenv
bootdelay=2
baudrate=9600
autoload=n
boardname=Glenfarclas
servername=aruba-master
bootcmd=boot ap
autostart=yes
bootfile=ipq806x.ari
mtdids=nand0=nand0
ethaddr=48:4a:e9:c6:23:88
stdin=serial
stdout=serial
stderr=serial
machid=1260
mtdparts=mtdparts=nand0:0x2000000@0x0(aos0),0x2000000@0x2000000(aos1),0x4000000@0x4000000(ubifs)
partition=nand0,0
mtddevnum=0
mtddevname=aos0
ethact=eth0
ipaddr=192.168.1.250
gatewayip=192.168.1.1
netmask=255.255.255.0
But I still can't even ping the gateway
apboot> ping 192.168.1.1
eth0: link up, speed 100 Mb/s, full duplex
Using eth0 device
ARP Retry count exceeded; starting again
eth0: link up, speed 100 Mb/s, full duplex
Looking for any suggestions
apboot> mfginfo
Inventory:
Card 0: System
Wired MAC : 48:4a:e9:c6:23:88
Wired MAC Count : 2
Serial : CNGKJ0TFYT
Date Code : 092318
Country : CCODE-US-a929292c200f946cf8cb445e93cfc9fe850b259f
Card 1: CPU
Assembly : 2010252C
Major Rev : 06
Minor Rev/Variant : 00
Date Code : 092318
Card 2: Antenna
Minor Rev/Variant : 01
apboot> version
APBoot 1.5.5.7 (build 56398)
Built: 2016-09-08 at 14:21:29
apboot> osinfo
Partition 0 does not contain a valid OS image
Partition 1:
image type: 0
machine type: 40
size: 8268300
version: 6.5.0.0
build string: ArubaOS version 6.5.0.0 for 32x (p4build@corfu) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #54817 SMP Thu Apr 28 07:05:41 PDT 2016
flags: preserve factory
oem: aruba
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
If I just restart the AP, I do see this error in the bootup messages:
ifconfig: bond0: error fetching interface information: Device not found
ifconfig: bond0: error fetching interface information: Device no[ 13.045985] drvlog_mod: module license 'Proprietary' taints kernel.
[ 13.134145] Disabling lock debugging due to kernel taint
t found
[: 1700: unknown operand
[ 13.224429] init_asap_mod: installation:0
Starting watchdog process...
Got all network params from APboot env. Skipping DHCP
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
route: SIOC[ADD|DEL]RT: No such device
Static IP detected. Checking if LACP needs to be configured
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
cat: /sys/class/net/bond0/bonding/mode: No such file or directory
Bonding mode set to
ifconfig: br0: error fetching interface information: Device not found
ifconfig: br0: error fetching interface information: Device not found