I found in google http://64.111.20.3/EOS-4.18.11M.swiDoes anyone have EOS-4.18.11M.swi?
I'm looking for EOS-4.13.16M.swi (for 7124SX)
I just got a 7124sx and cant find the update anywhere. Could you send me a link please?I got you, fam
By default, all traffic passes through vlan 1 on the switch. It should just work as long as you're not using vlans on the 19s and have IP assigned.I cannot pass IP traffic over the switch.
I picked up a new DCS7050QX-32S. I have the firmware upgraded to 4.21.1 F. Connected four new Mellanox compatible cables purchased from fs.com. Originally I had the error on the transceiver which I corrected with the command here.
The ports in the switch show connected it 40 GB.
Currently my Windows 19 hosts show the ports connected but I cannot pass IP traffic through the switch. I'm using the Mellanox 354a-FCBT cards. If I bypass the switch and connect the cables between 2 servers I can ping fine. I have disabled the Windows firewall.
Is there something I need to enable in the switch to move IP traffic?
I will fire up the switch and servers today and check the ARP.By default, all traffic passes through vlan 1 on the switch. It should just work as long as you're not using vlans on the 19s and have IP assigned.
Check the arp table on the switch to see if the switch is actually picking up network interfaces that are connected.