vlan

  1. Z

    Looking for switch reccomendations.

    I’m looking to lock down my network by segregating all of my computers in case someone gets in. I had picked up one of these, and found it a bit lacking for the price. Wasn't aware it was ten years old, and the web gui was so lacking. (FireFox 5.0.1 was not fully supported) I'm fine in the...
  2. L

    Easiest Method for Layer 3 routing with SONiC, PFSense, and multiple WANs

    After getting through this headache, I'm about to redo my entire home network with my new Celestica DX010 100g running SONiC. My current setup involves putting all the vlans on my pfsense router and letting it do all the intervlan routing. As my network is going to be 100 gigabit capable, layer...
  3. marcoi

    Home network redo of 2021

    I am in the process of upgrading my home network for this year. I am moving to 10GB and also want to redo the networking to make it more efficient etc. My house had some networking done prior to my purchase. I think its all cat 5e. It setup where ports are around the kitchen area, living room...
  4. C

    General help with VLAN, Router, Switch and Hyper-V

    Hello guys, I need help on a small project and hope anyone can help on this issue? We are 5 people a life in a shared apartment. Our idea is to have one central server where anyone can create vms, each of us has is own VLAN to split the traffic from each other. But our issue we are real...
  5. U

    Reliable router/firewall with good VLAN and QOS support for home?

    Hi - I'm looking to set up multiple VLANS at home to isolate primary computers, iot, guest network, cameras. Given the working from home situation, I also want to have configurable QOS to make sure my video meetings maintain bandwidth when someone is watching netflix. I'm going to be upgrading...
  6. T

    Switch management access with colocation

    This might be a little outside the normal scope of this forum, but I figure people here might have some answers. So I will have two switches in a colocation cabinet (both Cisco SG350-52). One is for LAN connections, and one is to share colocation internet, which comes in over a single 1G...
  7. E

    Unifi AP Issue

    I have a unifi AP setup in standalone mode with a PFSense Router. I want to setup a VLAN Tagged Network with no wireless password (for a guest network). Issue is, it doesn't seem like I'm allowed to setup an open network? This is what i see: Anyone tried to do this before? seems like it...
  8. Bjorn Smith

    Mellanox SX6018 L3 Routing

    Hi, I have this nice switch that I am really happy with, but I want to start using VLANS. I have created 3 VLANS and want to be able to route traffic between the VLANS. Reading up on it, it seem like you have to do the following: interface ethernet 1/1/2 no switchport force Which sets the...
  9. gb00s

    Newbie setting up VLAN in pfSense/OPNSense with Cisco SG200-26

    Hi Guys, I already said it here, but I'm relatively new to networking and I'm learning by doing. I read about VLAN's, trunks, layer 2 & layer 3 switches and I do kind of understand the basics. I want to work on a project and I'm kind of stuck by planning the configuration of the Cisco SG200-26...
  10. S

    Aruba S2500, vlan and ACL

    Hi. I've got Aruba S2500-48P switch and currently in process of setting it up. I've read couple of manuals, as well as cisco vs aruba manual available from HP and got extremely confused. I would like to block any communications between two VLANs on the switch and came up with the following...
  11. 3

    Dell Powerconnect 7048p Bind MAC to VLAN

    Hello all, I finally got around to upgrading to a PowerConnect 7048P from my netgear GS748TP (For sale if anyone is interested) primarily because it couldn't power my PTZ PoE camera. it also adds two 10GBE SFP ports and two 10GBE RJ-45 ports for uplinks. The switch is in place and working...
  12. S

    Automatic vMotion of pfSense with 3750g?

    I'm putting together my home lab, which includes (but isn't limited to) two r610s (Hosts A & B), each with 8 NICs, vSphere 6.7 and one 3750g. I've got both vCenter and pfSense VMs running, but have done only minimal configuration to each. At the moment, there is a cable running from my Pace...
  13. I

    nexus 3000 vlan

    I'm having some trouble with a nexus 3k and vlan configuration. This is the first cisco device I've touched in many years and normally use Arista and Ubiquiti switches. This seems like it should be pretty simple, there are a few hypervisors and storage boxes with lacp 40gbit redundant...
  14. R

    BMC/IPMI Best Practices

    Here's a subject that I'm only obliquely exposed to at work, that seems to be in major discussion in light of recent events (i.e. Bloomberg Businessweek Supermicro story). I'm in the slow process of redoing my home lab, mostly downsizing/consolidating to fewer systems. Currently I manage each...
  15. T

    Fanless 16+ port (smart) managed switch, LACP, VLAN

    Hey, I need a fanless (no compromise here) 16+ port (smart) managed switch with LACP and VLANs support. So far I own only one POE+ device (UniFi AP) and I'm ok with using PoE injector. I mean, I'd love to buy 16+ PoE+ fanless switch if such thing existed in reasonable price (<300 EUR), but if I...
  16. R

    Vlan default gateway setup / vMotion

    Hi, mixed network/ESX question but more net related I think. I have my network on 2 (+ lab on third) switch which are connected via trunk. I am running a couple of esx boxes which are o/c vmotion enabled. To be able to move vms from Esx1 on SwitchA to ESX2 on SwitchB I had to setup a default...
  17. V

    LB6M and PfSense vlan routing issue

    I have read a ton of posts on here and tried just about everything I could to try and get my LB6M to "trunk" data to my firewall. I am trying to build a router on a stick configuration. FW Config <?xml version="1.0"?> -<pfsense> <version>15.5</version> <lastchange/> -<system>...
  18. N

    Vsphere: VLANs & Distributed Switch Port Groups

    Having trouble trunking one of my VLANs into my Vsphere Cluster. Fairly basic setup. 2x ESX 6.5 hosts w/ 2 NICs Internal network is on vlan 1 Untagged IOT network on vlan 11 tagged, not tagged to vmware ports. Onboarding network vlan 200, tagged to vmware ports. Any ideas on what I am missing...
  19. S

    Sophos XG VLANS + Unifi

    Hello! I'm having a problem that's a bit similar to some posts I've ready, but I think my issue is unique enough to start a separate thread. I am using Sophos XG to serve as my primary firewall/gateway/DHCP server for my home network. Sophos XG is running on a dual NIC box, port 1 is connected...