vlan

Hi. I've got Aruba S2500-48P switch and currently in process of setting it up. I've read couple of manuals, as well as cisco vs aruba manual available from HP and got extremely confused. I would like to block any communications between two VLANs on the switch and came up with the following...

Hello all, I finally got around to upgrading to a PowerConnect 7048P from my netgear GS748TP (For sale if anyone is interested) primarily because it couldn't power my PTZ PoE camera. it also adds two 10GBE SFP ports and two 10GBE RJ-45 ports for uplinks. The switch is in place and working...

I'm putting together my home lab, which includes (but isn't limited to) two r610s (Hosts A & B), each with 8 NICs, vSphere 6.7 and one 3750g. I've got both vCenter and pfSense VMs running, but have done only minimal configuration to each. At the moment, there is a cable running from my Pace...

I'm having some trouble with a nexus 3k and vlan configuration. This is the first cisco device I've touched in many years and normally use Arista and Ubiquiti switches. This seems like it should be pretty simple, there are a few hypervisors and storage boxes with lacp 40gbit redundant...

Here's a subject that I'm only obliquely exposed to at work, that seems to be in major discussion in light of recent events (i.e. Bloomberg Businessweek Supermicro story). I'm in the slow process of redoing my home lab, mostly downsizing/consolidating to fewer systems. Currently I manage each...

Hey, I need a fanless (no compromise here) 16+ port (smart) managed switch with LACP and VLANs support. So far I own only one POE+ device (UniFi AP) and I'm ok with using PoE injector. I mean, I'd love to buy 16+ PoE+ fanless switch if such thing existed in reasonable price (<300 EUR), but if I...

Hi, mixed network/ESX question but more net related I think. I have my network on 2 (+ lab on third) switch which are connected via trunk. I am running a couple of esx boxes which are o/c vmotion enabled. To be able to move vms from Esx1 on SwitchA to ESX2 on SwitchB I had to setup a default...

I have read a ton of posts on here and tried just about everything I could to try and get my LB6M to "trunk" data to my firewall. I am trying to build a router on a stick configuration. FW Config <?xml version="1.0"?> -<pfsense> <version>15.5</version> <lastchange/> -<system>...

Having trouble trunking one of my VLANs into my Vsphere Cluster. Fairly basic setup. 2x ESX 6.5 hosts w/ 2 NICs Internal network is on vlan 1 Untagged IOT network on vlan 11 tagged, not tagged to vmware ports. Onboarding network vlan 200, tagged to vmware ports. Any ideas on what I am missing...

Hello! I'm having a problem that's a bit similar to some posts I've ready, but I think my issue is unique enough to start a separate thread. I am using Sophos XG to serve as my primary firewall/gateway/DHCP server for my home network. Sophos XG is running on a dual NIC box, port 1 is connected...