speed

  1. MultiUser

    WIM for Compression? AND Backup? Thoughts?

    So I just realized that 7Zip will compress to a WIM file... and after a little bit of testing.. (Im talking very little) I have a hypothesis that WIM compression is much more effective... Both in the time it takes, and the compression level. So why arent more people using WIM as the go - to...
  2. C

    Supermicro X10DRG-OT+-CPU 2666mhz (or more) memory?

    I took out one CPU from this board and the ram downclocked to 2133. I then turned off POR and set 2400mhz memory speed. Everything appears to be using 2400mhz. I am on linux so there is no proper way to check, for instance CPUZ, but all looks well. The same menu allows speeds up to 3200. Can I...
  3. X

    Supermicro H13SSL-N and fans oscillating between low and high speed

    Hi everyone, I've just build a hell of a monster with an Epyc 9334 QS in a Supermicro H13SSL-N. Not really knowing how all this worked yet, I grabbed some Noctua fans, as I had on my last build, but it seems even adjusting the thresholds either does nothing, so they keep oscillating, or has the...
  4. D

    HBA pcie 2.0 x8 card on pcie 3.0 x4 (electrical)

    I've filled up my motherboards 8 sata slots and now I'm looking for an HBA to get 8 more. Alas, I've only got a pcie 3.0 x8 physical with x4 electrical. I'm planning to expand my zfs pool and now I'm wondering if there are any serious bottlenecks having only 4 lanes would entail. It seems as...
  5. Y

    Dual Epyc 7742 and stockfish

    Could Patrick or someone tell me what kind of difference in NPS can I expect when running Stockfish chess engine with 2x Epyc 7742 cpu's in a Supermicro H11DSi-NT motherboard with DDR4-2666 MHz ram or DDR4-3200MHz ram? I read that in an AMD it can be several percent (~5) faster in benchmarks...
  6. G

    Fan setup stuck with CPU fan warning on both sockets

    Hi, I'm building an 'old' HomeServer with 2 Xeon X5680's on an Intel S5520HC in a NZXT 340 Elite (Mid-Tower). My problem are the stuck fans from Noctua. These are NF-P12's Redux PWM with a fan speed range of 450rpm tp 1700rpm. The Intel board gives me constant CPU-Fan orange warning light...
  7. S

    ESXi 6.5: Server 2016 VM SSD transfer speed issues

    Hello guys. I'm having some weird problems with my server's data transfer rate and need your help. When ever I copying a large file (30GB) from one Seagate SSD to the other Seagate , it starts at full speed from about 400 -450MB/s and then suddenly drops off to around 150-250 MB/s after some...
Top Bottom