Hello folks!
I've recently acquired two T9710 which are arriving soon so they can be a home lab VMWare Cluster.
I'm adding to each machine 8x SATA3 consumer level SSDs using SAS breakout cables. Those are capacity disks.
I also need to add 4x NVMe M.2 SSDs. However, the T7910 doesn't have M.2...
Hi there!
I'm new here, so first of all: Hello everybody.
I am currently planning a makeover of my current Lab Environment:
- 2x R720 with tiered storage spaces direct (WS2019 based): NVMe, SSD and Spinning Rust.
- Interconnected via 2x 40G Infiniband (using RoCE) , North-South via 2x 10G...
Ceacent NVMe Controller SSD Riser
or
Linkreal 8 Port U.2 to PCIe x16 SFF-8643 NVMe SSD Adapter
Anyone have any experience with either one of these cards?
Do they perform the same?
Is one better than the other?
Hi All,
Any one tried one of these cards with PLX chips?
I have one x8 PCIe slot available in my Dell R720.
So I was thinking to get one of these cards, slap 4 x nvme's on it. Create a fast pool in my TrueNas.
Cheers.
Here is the link...
***Item Sold***
HighPoint SSD7540 NVMe Controller 7500 Series PCIe Gen4 M.2 RAID Controller.
Bought from Newegg Business, and I waited to long to see if it would fit in my server, it does not fit. Could not return it, so selling it. I mounted two NVMe drives but never formatted drives or used...
Hi everybody, long time viewer, first time poster...
I'm running into a weird problem with the Ableconn PEXM2-130 Dual PCIe NVMe M.2 SSDs Carrier (ASMedia ASM2824 Switch) I just bought where it only recognizes one of the NVMe drives unless I unplug the disk shelf attached to the LSI 9207-8e...
I'm building a new 2U server with Supermicro X10DRD-iNTP boards and I'm wondering if there are any short Adapter SFF-8643 to U.2 adapter cables below 50cm in the market. Unfortunately, I can't find them. The board has 2 PCI-E 3.0 NVMExpress x4 External Ports nicely close to the case wall where I...
Trying to purchase a single HoneyBadger from Liqid is like pulling teeth, and now Highpoint has released an 8-port PCIe4 M.2 Card through normal channels.
Has anyone tried out this card, and/or compared it to the HoneyBadger LQD4500?
The Liqid devs said they modified the Switch firmware code...
Hi,
I'm trying to boot my Supermicro server from an NVMe on PCIe without success. I'm using Ubuntu 20.04 desktop. I heard that I have to modify the bios or maybe use an internal USB Stick that would contain the boot loader. would really appreciate some help as I need to do this ASAP.
thanks in...
Hello there,
I have an AsRock Rack ROMED6U-2L2T motherboard that has a bunch of Mini Sas HD & Slimsas ports and also four PCIe Gen 4.0 16x slots and given that the Slimas / Slimline ports are supposedly 8i, I thought I might just get two of these cables and be able to hook up two U.2 (Intel DC...
For Sale:
Supermicro
4x (Gen 4) 3.5" to 2.5" Converter Drive Tray (MCP-220-00043-0N) ($10 each)
2x AOM-SAS3-8I8E-LP dual port SAS 8643 to 8644 adapter, low profile ($25 each or $45 for both)
7x FAN-0126L4 hot swap fan (4 with housing) (Nitro model)
Supermicro X11SSQ-L-DE05B Embedded Intel...
Hi guys.
I'm wondering whether the H8DGi-F board (2014) I own can support NVMe drives if I add a PCI-E card.
https://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DGi-F.cfm
Supermicro's support site has nothing on this subject.
I tried a generic PCI-e NVMe card with a consumer...
Hello.
I have a server based around a SuperMicro X9DRi-F. Sad story about it is that the motherboard lets you bifurcate the lanes in the BIOS, but SuperMicro support says that just because the BIOS lets you do it, doesn't mean it works (they recommended the X10 or newer). I have a couple of the...
SOLD
Free shipping in the 48
Qty 4
SFF 8639 U.2 Case enclosure for M.2 NVME drives. part number SY-ADA40112
brand new - never used
part here -> 2.5" U.2 (SFF-8639) to M.2 NVMe - SY-ADA40112
amazon link for same product ->...
I've recently completed a similar EPYC build to the one completed by Patrick. This was an upgrade to my Sun Ultra24 workstation, which I have used since 2009. After a few hours with a multi-meter to work out the front panel cables, the build went smoothly and I now have a workstation with the...
Does anyone know if you can buy a PCIe 3.0 x16 low profile card that supports FOUR M2 NVMe drives?
I found this Supermicro card which supports TWO drives but I am looking for a card that supports FOUR drives...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.