[FS/WTB] [US-NC] FS: Supermicro parts, SAS/SATA cards, DDR4 RAM etc ; WTB: 4-12x32gb DDR4 2400 ECC Reg

Almighty

Active Member
Oct 27, 2019
156
84
28
For Sale:
  • Supermicro
    • 4x (Gen 4) 3.5" to 2.5" Converter Drive Tray (MCP-220-00043-0N) ($10 each)
    • 2x AOM-SAS3-8I8E-LP dual port SAS 8643 to 8644 adapter, low profile ($25 each or $45 for both)
    • 7x FAN-0126L4 hot swap fan (4 with housing) (Nitro model)
    • Supermicro X11SSQ-L-DE05B Embedded Intel G4560 chip plus 8gb 2133mhz ddr4 ecc registered ram ($110)
      • Intel QuickSync support
      • Heatsink/fan included
      • 4 pin to 8 pin cpu power adapter optional ($8)
    • 2x SNK-P0048PS passive heatsink for LGA2011-3 - NIB ($15 each)
  • HP 28-port SAS Expander (updated firmware, 3gb/s - good for spinning hdds) ($60)
  • Areca 1883i 8 Port 12Gb/s PCIe SAS RAID Card ($300)
    • Great condition
    • I have a good battery/pci expansion for additional $80
    • I may only have high profile bracket - if you need low i'll try to find it
  • 4x 4GB DDR4 2666mhz Unbuffered Ram ($15 each)
    • KVR24N17S6/4
  • 2x 4GB DDR4 2400mhz ECC Registered RAM, works in supermicro and more
    • Hynix I think
  • Intel X520-DA2 dual port SFP+ 10gbe network card ($70)
    • Can include 10ft DAC cables for $10 each
    • Low profile and high profile bracket included
  • 2x Intel Xeon E5-2620v3 ($20 each) - 2 sold, 2 left
  • Intel RES3FV288 36Port 12Gb/s PCIe SAS RAID Expander Card ($200 - pending sale)
    • 20 internal, 8 external inputs
    • 8 internal outputs
    • I bought it new about 1.5 years ago
    • Comes with power cable and may have spare sas cables depending on your needs
      • Can be powered by PCIe too
    • I have both low and standard profile bracket - please choose 1
    • May need a week lead time to ship as I need to move some components around
  • Intel RES3TV360 36Port 12Gb/s SAS RAID Expander Card ($250 - pending sale)
    • 28 internal inputs
    • 8 internal outputs
    • I bought it new about 1.5 years ago
    • Comes with power cable and may have spare sas cables depending on your needs
    • Mounts like a motherboard if you have posts that fit it - i just have it laying in the case
    • May need a week lead time to ship as I need to move some components around

Want to Buy:
  • 4-8x 32gb HMA84GR7AFR4N-UH DDR4 2400mhz ECC Registered DIMMs. Looking for ~$100 each depending on quantity.
    • If you have similar 2400mhz RDIMM that's Supermicro X10 compatible I'd be open to offers, like HMA84GR7MFR4N-UH or Samsung
  • Brocade ICX6450-24P with rackmount ears

Want to Trade:
  • Open to trades

SOLD:
  • Supermicro
    • 6x CSE-826 chassis
      • BPN-SAS3-826EL1 expander backplane
      • 2x sas 8643 cables included
      • 12x 3.5" HDD caddies included (with screws if needed)
      • 1x PWS-920P-SQ included (extra one is $60)
      • 1x rear dual 2.5" hot swap bay with caddies and cables ($40 extra)
      • 1x supermicro quick rail set rev b ($60 extra)
      • Needs either mb/cpu/ram or JBOD parts (i have 1 set of jbod3 parts for extra ~$200)
      • Shipping is anywhere between $40-90 insured depending on proximity to NC
    • 3x (Gen 5.5) Tool-Less 3.5" to 2.5" Converter Drive Tray (MCP-220-00118-0B) - brand new, no screws required ($17 each)
  • LSI sas 9361-8i with cache vault and battery backup in another PCI slot ($250 - SOLD)
  • Dell T40 w/ Xeon E-2224G, 2x16GB ECC Unbuffered ($550) - SOLD
    • 128gb SSD, DVD-RW, 2 extra caddies for 3.5" drives
    • BIOS flashed to Precision 3630 with unlocked NVME port
  • APC SMT1000RM2U 1000va/700w 2U rackmount UPS - used ($250 SHIPPED to CONUS - SOLD)
    • Batteries are APC oem, less than 2 years old with 3-4 years of life left
    • Rails included!
  • APC SMT3000RM2UC 3000va/2700w 2U rackmount UPS - brand new, open box ($550 - SOLD)
    • Manufactured mid 2020 - batteries are fresh (i have another 3000va unit and charged this new battery pack once a month as recommended by apc)!
    • Comes with everything
    • Fixed some tears in the box and added some extra padding inside for shipping
  • EliteSTOR ES212X12 2U SAS 12G JBOD ($400 - SOLD)
    • Modded to be very quiet (noctua fans in the case and switched out psu fans) - remains cool
    • Has an Areca 8028 24 port expander inside which is worth about the cost of the JBOD
    • 8 of the 12 drive caddies don't open (the springs are messed up) but for a homelab it hasn't been a big deal to me
      • I put the 4 good ones in the middle so i can get access to the top/bottom ones if i need to replace a drive periodically
    • I tried going with official rails but they sucked, so went with a cheap rack shelf
  • 1x Intel Xeon E5-2680v4 ($170 for 1, $160/ea for multiple ) - SOLD
  • 4x (Gen 5.5) Tool-Less 3.5" to 2.5" Converter Drive Tray (MCP-220-00118-0B) - gently used, no screws required ($12 each - SOLD)
  • Aruba S2500-48P-4x10G PoE switch with 4 10gbp SFP+ ports ($80)
  • APC BR1500MS2 - 3 months old ($160 SHIPPED to CONUS)
    • Like new
  • APC BR1350MS - 1 year old ($130 SHIPPED to CONUS)
    • Great condition
  • 1x 16GB DDR4 2666mhz ECC Unbuffered DIMM ($80)


Payments: Paypal (verified)
Shipping: Actual cost added to price (USPS, FedEx, UPS)
 
Last edited:

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,279
1,737
113
CA
RAM for that price this year, I think you'll be hard to find that outside a Great Deal.. Sadly :(

If you have anything to trade for the CPU send me a PM, I have 2 of those CPUs I'm going to sell\trade :)
 
  • Like
Reactions: abq

Almighty

Active Member
Oct 27, 2019
156
84
28
I managed to get 12 at that price in the past 45 days so I'll remain hopeful ha.

I have a ton to trade. I'll try to come up with a list this week.
 

Almighty

Active Member
Oct 27, 2019
156
84
28
The Drive trays that are broken what exactly does it stop you from doing? Is it just more difficult to change drives or are they completely unusable?
Sorry I should have given more details. Definitely usable! I use this as a backup array now but don't need this additional backup system anymore. I just pull them straight out or wait till the system is down to pull drives out if necessary. I can give you a live demo if you'd like ha.
 

Brian Puccio

Member
Jul 26, 2014
53
17
8
38
The MCP-220-00118-0B take some of the thicker enterprise 2.5 SSDs still, right? For $12 I will take the gamble. PM on the way.
 
  • Like
Reactions: Almighty

Almighty

Active Member
Oct 27, 2019
156
84
28
PM sent ^

Supermicro 2u sold to poto.

I have 1 more 826 chassis available. Shipping was $50 to southeast. Calculated $85 to west coast.
 

icusu

New Member
May 2, 2021
2
3
3
Almighty here is pretty much furnishing a whole new media server for me. Here's the list of items I'll be buying.
Taking a bunch of this stuff.

Super micro CSE-826BE1C-R920LPB chassis to hold all this stuff

The second PWS-920P-SQ
so my wife doesn't miss an episode of the other fails.

2x Intel Xeon E5-2620v2
since it's just a media server...these will work for now.

Supermicro X10DRH-i board
You know, to plug stuff into.

LSI 9361-8i
Because who doesn't need an overkilled raid setup

Dealing with Almighty was a pleasure. He took the time to hold my hand through this process and answered all of my newb leaning questions. It was much appreciated.
 
  • Like
Reactions: Jaket and Almighty

NateS

Active Member
Apr 19, 2021
137
76
28
Sacramento, CA, US
2x Intel Xeon E5-2620v2
since it's just a media server...these will work for now.
Do you mean V3? I don't think that board supports V2s, just V3 and V4.

As it so happens, I'll also have a pair of 2620 V3s that'll be going up for sale very soon. I just have to figure out how to get the bios updated on my annoyingly-hard-to-update HP server so that I can install the V4s I got first.
 
Last edited:

Brian Puccio

Member
Jul 26, 2014
53
17
8
38
I wanted to pop back in here and thank @Almighty as well. I received the Supermicro 3.5 to 2.5 toolless drive adapters and they look completely unused. On top of that, I was expecting adapters I’d put in my current 3.5 drive caddies, but these were brand new 3.5 drive caddies with the toolless adapter already installed.

These things are sweet!
 
  • Like
Reactions: Almighty

poto

Active Member
May 18, 2013
215
78
28
Received CSE-826 chassis/rails & SQ pwr supply from @Almighty. Excellent packing, fast shipping & great communication. All were in like-new condition and operation. Thanks for a pleasant transaction!
 
  • Like
Reactions: Almighty