Hello all,
I recently set up and Supermicro H11DSI, and I am nearly completed except I am having an issue where whenever I load into an OS, LED3 starts to blink red, and the CPU fan revs up and down in about 10 second intervals. It is my understanding that the -NT boards give more functionality...
I have read several threads on this forum about how CPU VRM temperatures may get out of hand in a full tower workstation case with Supermicro H11DSi especially for high TDP CPUs (e.g. 7f52). A few of these posts recommend for builders to use a 4U chassis instead and just deal with the noise. I...
So I ordered a couple of these: AMD epyc 2U active SP3 TR4 4 heat pipe CPU radiator Ⅹ 399 H11DSi | eBay
One came missing a bolt. Any insight on how I might most quickly be able to replace it? I have an LGA2011-3 heatsink here but I am guessing the bolt threads/diameter/spring tension aren't...
I have an H11DSi-NT with a CSE-826 containing a BPN-SAS3-826EL1 backplane. It also has the two rear 2.5in bays/backplane. I'd like to run NVME for boot stuff and then use the front 12 bays for storage space, probably with more than one array if possible. I have used Dell PERC stuff at work but...
My thought has been that I would put an H11DSi in perhaps a CSE-826? Quiet operation is very desired so I would probably go with SQ PSUs, though price would beat out quiet in the end (i.e. I don't have $1000 to spend on the chassis). I see there are SAS1,2,3 backplanes along with some pass...
Hello everyone. I ran into a problem: the BIOS and Windows 11 Pro do not see one memory stick, but in the HWiNFO64 program it is determined, the manufacturer and model are specified, but the memory itself is not used.
System: Supermicro H11DSi-NT dual-processor motherboard, two AMD EPYC 7302...
Hi,
I've recently ordered two EPYC 7551 (non-Dell) for a budget dual CPU build. After that I've came across this thread and particularly this post. Now I'm worried this won't run, since I'm unsure if I have matching part numbers. I've ordered everything in time, but the problem is I've messed up...
Googled, but no luck... Seems like Supermicro H11DSi-series is the only motherboard for Dual EPYC configuration...
The other choice is Gigabyte MZ31-AR0 or Tyan Tomcat SX S8026, but it has only a single EPYC socket...
I like my Supermicro H11DSi-NT, but it has no Hard Disk Drive activity LED...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.