So I'm getting the final pieces together for my NAS build. Just got my AsRock Rack X570-D4U-2L2T, already had my 5950X, and now I need a CPU cooler. My priorities go as follows:
1) Reliability, this server is going to host my NAS which will hold very important data. (I'm not sure if this...
Hello,
I am going to buy Supermicro A+ Server 4124GS-TNR with dual Epyc 7H12 (TDP of each CPU is 280W) and GPUs. I am worry about cooling CPU.According to Supermicro the server has SNK-P0064AP4 heatsink which support CPU with TDP up to 180W (see Supermicro SNK-P0064AP4 4U Active CPU Heat Sink...
I am selling some of my previously used hardware. It's fully working and tested on Supermicro X11SPG-TF Motherboard.
Price is fair and non-negotiable.
CPU: ES (Engineering Sample) Xeon Gold 6130 1.8GHz, QL1M | 100€ with cooler 130€.
Cooler: Dynatron B5 2U | with CPU.
RAM: Samsung 48GB (6x 8GB)...
Sigh. Turns out this particular model does NOT work with the 2011-3 Narrow ILM sockets: it only works with the square ones. So I have an unused one of these looking for a good home. I'm new here so happy to do a facetime or phone call or whatever before the sale to verify.
Free ground/USPS...
So I see a lot of people asking a similar question, but it seems like the answer is always "it depends"
So here's what I have:
Supermicro SC933 3U case (the 15-bay one)
X10SRL-F 2011-3 UP motherboard - narrow ILM
Xeon E5-2650 v4 105w
The shroud is very thick and hard and tapers down towards...
Hello people,
As I read in some forums, some consider a so called "Bitumenbox" (Sorry, I came from Germany so I don't know if this term is also known in English.
And 'cause I want to use HDDs for my DIY-NAS I consider to buy or built such boxes but I ave a few questions about this (thought...
In the process of getting all the parts together for getting a proper homelab.
NIB 2x Intel S2600cp2 motherboards should arrive tomorrow.
2x Antec P380 cases
3x Mellanox connectx-2 cards
Dell PowerEdge 6224 with 4 10G sfp+ ports
Psu's etc is taken care of.
The coolers for the cpu's is the part...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.