Search results

Hi. I have a Mikrotik CRS504-4XQ-IN with one available spare 100Gb QSFP port that I want to use to go to some different eqipment. Since one of my devices I want to go to is about 50m away, I cannot use a 100Gb to 4x25Gb Direct Attached breakout cable. Is it possible to use for instance an...

Yes I know it's totally overkill, but sometimes... I'm looking at buying a Mikrotik 100Gb switch and some single 100Gb PCI-E cards together with those ultra cheap $5 Intel QSFP 100Gb adapters. I'm planning on using them in ethernet mode. Mellanox ConnectX-4: $89 Mellanox ConnectX-5: $150 Intel...

Planning of buying a small Proxmox, OPNsense server but something newer than the j4125 and 10nm. Any reason to go with the more expensive n6005 or n51005 over the n5095 besides small cpu max hz difference? To me they look more or less identical....??

Hopefully, this is only the beginning... ASRock Rack > X470D4U Let's hope it's not too expensive.

Not sure if this is a deal or not, but thought I should post it anyways. Currently at €591 with 0 bids. Only shipping within Germany... Supermicro X10SDV-16C-TLN4F / 16 Core Xeon D-1587 / 10Gbe / Server Mainboard | eBay

Anyone actually seen and real life products with these processors??

Proxmox 5.0 released and out of beta. Proxmox VE 5.0 released!

Haven't seen this posted on the site... Asus have released a $99 10gb NIC. XG-C100C | Networking | ASUS Global Does this finally mean the start of 10gbit for the masses?

I'm getting some SMART error messages from my system on some of the drives, but not all. Same for every error message expect the current device. "Device: /dev/sde [SAT], Read SMART Error Log Failed" Running Proxmox 5.0 beta with a LSI 9200-8e card with a Rackable SE3016 JBOD with 12 Hitachi...

Proxmox 5.0 beta is out and you can download it at Download ISO installer, service packs, and software documentation for Proxmox products

So, I've been thinking a bit about putting Mini-ITX boards standing on the side in a 4U enclosure. A Mini-itx board is 6,7"x 6,7" and 4U is 7". This should leave enough room for the "structure" of the chassis. I'm thinking of buying the cheapest 4U chassis I can find ($70) and cut out the...

Hi. I'm looking to buy a Supermicro C202 mainboard with six sata-2 ports. When I look at the pictures of the mainboard it seems that the sata ports are grouped in one 2xsata and one 4xsata. Anybody know if it is possible on the C202 chipset to passthrough just 4 of the ports (unraid VM) in...

Hi. I'm looking for a low power server, used or new build. I have three requirements, Low power, IPMI and VT-d. I need the IPMI to control the server (power on/off, view screen, remote keyboard mouse+++) as I'm working offshore and stay away from the machine at least 14 days at a time...

IBM M1015 without bracket for $65... http://www.ebay.com/itm/IBM-ServeRaid-M1015-SAS-SATA-PCI-e-RAID-Controller-46M0861-46M0831-/380492923084?pt=US_Server_Disk_Controllers_RAID_Cards&hash=item58972540cc -Kaj

Hi. I have a S5512WGM2NR motherboard and a M1015 I would like to get to work in Esxi 5.0. When I try to start Esxi it always stops at loading megaraid_sas driver... I have flashed the with latest bios and the M1015 with latest bios... If I load up the server directly in win2k8 r2 the...