I can take that, I need boot drives for many of my servers.Have a Sandisk U110 64GB SATA SSD (2.5"). Won't hold much, but could be a boot drive? Shipping from Phoenix ($3-4 within the continental US).
I can take that, I need boot drives for many of my servers.Have a Sandisk U110 64GB SATA SSD (2.5"). Won't hold much, but could be a boot drive? Shipping from Phoenix ($3-4 within the continental US).
Possible dibs on that GM-650. Does it include all cables?Switched gears and ponied up for a SuperMicro chassis, after the DIY route turned into a Frankenserver that did not make sense and no longer met my use case. I'm also finally letting go of some miscellaneous stuff I don't have a need for, am too lazy and busy to try and sell, and would feel badly about if I simply chucked it, so here goes...
- Supermicro mobile 3.5" drive caddy, new (open box) - 3 available
- 5 drive slots | fits 3x 5-1/4" CD-Rom slots or 3U height opening
- no rear circuit board | rear cover is attached
- Supermicro 3.5" drive caddy new (open box) - 15 available
- Gen 2.5 or 3.5 (I believe... not certain - please see photos)
- with plastic dummy tray
- 3-D printed mid-case fan wall for 120mm fans in a Supermicro SC846 chassis - 1 available
- 3x 120mm fan mid-case config for SC846 chassis
- Does not fit stock SC846 chassis with redundant power supply cage
- Only works in conjunction with PS2 power supply mod (removal of stock redundant power supply cage)
- Passive CPU heatsinks
- 1U
- Socket LGA 1366
- SNK-P0037P (X8) Rev. B1 - 1 available
- SilverStone AR06 - 1 available
- missing one of the screws that attaches from underside of motherboard
- no fan (on top)
- no fan screws
- Socket LGA 1150
- iCool brand (no model #) - 1 available
- integrated low profile 80mm fan
- Lenovo ThinkCentre M72 M92p - 1 available
- Unknown socket type
- Solid copper: 3-15/16" x 2-7/8" - 2 available
- 2U
- Socket LGA 1366
- Supermicro 2U heat sink socket LGA-1366 (part # SNK-P0038P | Rev. B) - 2 available
- Fans
- Supermicro hot swap fan model FAN-00507 - 3 available
- San Ace 9G0912H204
- 92mm | PWM (4-pin) | 12v | 0.23a | 51 Pa static pressure | 56 CFM | 2,850 RPM | 32 db
- Nidec Ultraflo fan - 3 available
- 80mm | model V80E12BHA5-57
- AVC BASA0715B2U - 1 available
- 12vdc | 0.7a | ball bearing
- Power Supplies
- Athena Power
- Hercules 400w - 1 available
- single 12v rail @ 21a
- 3.3v @ 16a
- 5v @ 16a
- Seasonic Focus GM-650 - 1 available
- PS2 form factor | Semi-modular | 650w | 80+ Gold | Single 12v rail 54a | 3.3v/5v max 100w combined | 1x EPS connector
- NOTE: This might be one of the "bad" versions. I honestly don't know, but it's one reason why I am ditching this (uncertainty)
- Seasonic SS-200SFD Active PFC
- SFX form factor | 200w | single 12v rail 15a | 3.3v 17a | 5v 21a
If interested in any of these, please PM me. They are all free for the asking + cost to ship to you. In some cases, I may need to ask you to cover the cost of a shipping container and/or padding, but this can be negotiated and/or may not be necessary. I have saved a few extra boxes (mostly from Amazon orders), and will minimize your cost as much as possible.
Yes... minus the power cord to the wall... but if you're not picky and need one, I have a box full of them somewhere and will add one for you.Possible dibs on that GM-650. Does it include all cables?
I'm not in the USA (but I do have a contact in Oregon!) so you can keep the power cord.Yes... minus the power cord to the wall... but if you're not picky and need one, I have a box full of them somewhere and will add one for you.
Sure thing. Please send me a PM to confirm you want it and provide the shipping zip code when you can determine it. Then, I can provide a shipping quote.I'm not in the USA (but I do have a contact in Oregon!) so you can keep the power cord.
prepped and ready for shipping... I had to post pics here b/c I could not find a way to attach files in a PMDibs on the rack case
Arrived safely. Thank you!(US) DDR3-1333 Reg/ECC DIMMs
(4) 4GB
(5) 2GB
Ships from 80026
Just claimed.
- you must pickup and these items should fit in your Prius or lyft/uber ride but you may have difficulty transporting them using a bicycle that has no trailer. My advice is that you will need a dolly or cart of some kind for the 7606-S.
1 left. No skins no rear doors. can provide a few horizontal cable mgmt rails.Updated 2022/03/14 - 1 Remaining.
What - Backbox 45U Network Rack EC45U2436 (see description below)
Status - Available
Location - Denver, CO downtown
Cost - Free
Qty -31 Left
Expiration - March 25, 2022
If you don't have any luck here, might look into donating it. Last 48U rack I had wound up with the Red Cross. They even showed up to haul it away.1 left. No skins no rear doors. can provide a few horizontal cable mgmt rails.
Still have this?If someone needs a short depth 4U chassis it's all yours
I believe this is what I have, but I can't find the original receipt
CHENBRO RM42300-F 4U Rackmount Server Case - Newegg.com
Buy CHENBRO RM42300-F 1.2 mm SGCC 4U Rackmount Server Case 3 External 5.25" Drive Bays with fast shipping and top-rated customer service. Once you know, you Newegg!www.newegg.com
What - CHENBRO RM42300-F
Status - Available
Location - San Jose, CA
Cost - Free
Qty - 1
Expiration - March 25, 2022