US - STH Perpetual Freebies Thread

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Bert

Well-Known Member
Mar 31, 2018
823
383
63
45
Have a Sandisk U110 64GB SATA SSD (2.5"). Won't hold much, but could be a boot drive? Shipping from Phoenix ($3-4 within the continental US).
I can take that, I need boot drives for many of my servers.
 
  • Like
Reactions: Samir

DaveInTexas

Member
Oct 28, 2021
77
85
18
Switched gears and ponied up for a SuperMicro chassis, after the DIY route turned into a Frankenserver that did not make sense and no longer met my use case. I'm also finally letting go of some miscellaneous stuff I don't have a need for, am too lazy and busy to try and sell, and would feel badly about if I simply chucked it, so here goes...
  • Supermicro mobile 3.5" drive caddy, new (open box) - 3 available
    • 5 drive slots | fits 3x 5-1/4" CD-Rom slots or 3U height opening
    • no rear circuit board | rear cover is attached
  • Supermicro 3.5" drive caddy new (open box) - 15 available
    • Gen 2.5 or 3.5 (I believe... not certain - please see photos)
    • with plastic dummy tray
  • 3-D printed mid-case fan wall for 120mm fans in a Supermicro SC846 chassis - 1 available
    • 3x 120mm fan mid-case config for SC846 chassis
    • Does not fit stock SC846 chassis with redundant power supply cage
    • Only works in conjunction with PS2 power supply mod (removal of stock redundant power supply cage)
  • Passive CPU heatsinks
    • 1U
      • Socket LGA 1366
        • SNK-P0037P (X8) Rev. B1 - 2 available
      • SilverStone AR06 - 1 available
        • missing one of the screws that attaches from underside of motherboard
        • no fan (on top)
        • no fan screws
      • Socket LGA 1150
        • iCool brand (no model #) - 1 available
          • integrated low profile 80mm fan
      • Lenovo ThinkCentre M72 M92p - 1 available
      • Unknown socket type
        • Solid copper: 3-15/16" x 2-7/8" (distance center-to-center holes is 3.5") - 2 available
    • 2U
      • Socket LGA 1366
        • Supermicro 2U heat sink socket LGA-1366 (part # SNK-P0038P | Rev. B) - 2 available
  • Fans
    • Supermicro hot swap fan model FAN-00507 - 3 available
      • San Ace 9G0912H204
      • 92mm | PWM (4-pin) | 12v | 0.23a | 51 Pa static pressure | 56 CFM | 2,850 RPM | 32 db
    • Nidec Ultraflo fan - 3 available
      • 80mm | model V80E12BHA5-57
    • AVC BASA0715B2U - 1 available
      • 12vdc | 0.7a | ball bearing
  • Power Supplies
    • Athena Power
      • Hercules 400w - 1 available
        • single 12v rail @ 21a
        • 3.3v @ 16a
        • 5v @ 16a
    • Seasonic Focus GM-650 - 1 available
      • PS2 form factor | Semi-modular | 650w | 80+ Gold | Single 12v rail 54a | 3.3v/5v max 100w combined | 1x EPS connector
      • NOTE: This might be one of the "bad" versions. I honestly don't know, but it's one reason why I am ditching this (uncertainty)
    • Seasonic SS-200SFD Active PFC
      • SFX form factor | 200w | single 12v rail 15a | 3.3v 17a | 5v 21a


If interested in any of these, please PM me. They are all free for the asking + cost to ship to you. In some cases, I may need to ask you to cover the cost of a shipping container and/or padding, but this can be negotiated and/or may not be necessary. I have saved a few extra boxes (mostly from Amazon orders), and will minimize your cost as much as possible.
 

Attachments

Last edited:
  • Like
Reactions: Samir and Rock

Wasmachineman_NL

Wittgenstein the Supercomputer FTW!
Aug 7, 2019
1,872
617
113
Switched gears and ponied up for a SuperMicro chassis, after the DIY route turned into a Frankenserver that did not make sense and no longer met my use case. I'm also finally letting go of some miscellaneous stuff I don't have a need for, am too lazy and busy to try and sell, and would feel badly about if I simply chucked it, so here goes...
  • Supermicro mobile 3.5" drive caddy, new (open box) - 3 available
    • 5 drive slots | fits 3x 5-1/4" CD-Rom slots or 3U height opening
    • no rear circuit board | rear cover is attached
  • Supermicro 3.5" drive caddy new (open box) - 15 available
    • Gen 2.5 or 3.5 (I believe... not certain - please see photos)
    • with plastic dummy tray
  • 3-D printed mid-case fan wall for 120mm fans in a Supermicro SC846 chassis - 1 available
    • 3x 120mm fan mid-case config for SC846 chassis
    • Does not fit stock SC846 chassis with redundant power supply cage
    • Only works in conjunction with PS2 power supply mod (removal of stock redundant power supply cage)
  • Passive CPU heatsinks
    • 1U
      • Socket LGA 1366
        • SNK-P0037P (X8) Rev. B1 - 1 available
      • SilverStone AR06 - 1 available
        • missing one of the screws that attaches from underside of motherboard
        • no fan (on top)
        • no fan screws
      • Socket LGA 1150
        • iCool brand (no model #) - 1 available
          • integrated low profile 80mm fan
      • Lenovo ThinkCentre M72 M92p - 1 available
      • Unknown socket type
        • Solid copper: 3-15/16" x 2-7/8" - 2 available
    • 2U
      • Socket LGA 1366
        • Supermicro 2U heat sink socket LGA-1366 (part # SNK-P0038P | Rev. B) - 2 available
  • Fans
    • Supermicro hot swap fan model FAN-00507 - 3 available
      • San Ace 9G0912H204
      • 92mm | PWM (4-pin) | 12v | 0.23a | 51 Pa static pressure | 56 CFM | 2,850 RPM | 32 db
    • Nidec Ultraflo fan - 3 available
      • 80mm | model V80E12BHA5-57
    • AVC BASA0715B2U - 1 available
      • 12vdc | 0.7a | ball bearing
  • Power Supplies
    • Athena Power
      • Hercules 400w - 1 available
        • single 12v rail @ 21a
        • 3.3v @ 16a
        • 5v @ 16a
    • Seasonic Focus GM-650 - 1 available
      • PS2 form factor | Semi-modular | 650w | 80+ Gold | Single 12v rail 54a | 3.3v/5v max 100w combined | 1x EPS connector
      • NOTE: This might be one of the "bad" versions. I honestly don't know, but it's one reason why I am ditching this (uncertainty)
    • Seasonic SS-200SFD Active PFC
      • SFX form factor | 200w | single 12v rail 15a | 3.3v 17a | 5v 21a


If interested in any of these, please PM me. They are all free for the asking + cost to ship to you. In some cases, I may need to ask you to cover the cost of a shipping container and/or padding, but this can be negotiated and/or may not be necessary. I have saved a few extra boxes (mostly from Amazon orders), and will minimize your cost as much as possible.
Possible dibs on that GM-650. Does it include all cables?
 
  • Like
Reactions: Samir

Wasmachineman_NL

Wittgenstein the Supercomputer FTW!
Aug 7, 2019
1,872
617
113
Yes... minus the power cord to the wall... but if you're not picky and need one, I have a box full of them somewhere and will add one for you.
I'm not in the USA (but I do have a contact in Oregon!) so you can keep the power cord.
 
  • Like
Reactions: Samir

DaveInTexas

Member
Oct 28, 2021
77
85
18
CLAIMED

-----------------------------------------------------------------

Also giving away my RSV-4500U... shipping at your expense, but it will be wrapped and protected as well as possible.

This INCLUDES a set of rails. Please note the Rosewill rails leave much to be desired (tho they do work - tested!)... but... I shall include them and their hardware. The inner rails are currently attached to the chassis (see photos), however I'm not sure if that is the best idea with regards to shipping (your choice if I remove them prior to shipping or not).

Front panel key is included.

Chassis is ~ 27.5" long. The rails are adjustable, 4-post. Minimum depth ~20"

Please PM me... 1st dibs gets it.
 

Attachments

Last edited:
  • Like
Reactions: Samir and Rock

itronin

Well-Known Member
Nov 24, 2018
1,233
793
113
Denver, Colorado
All gone!

Updated 2022/03/14 - 1 Remaining.
Updated 2022/04/12 - no racks remaining.

What - Backbox 45U Network Rack EC45U2436 (see description below)
Status - Available
Location - Denver, CO downtown
Cost - Free
Qty - 3 1 Left
Expiration - March 25, 2022

Description:
Used Blackbox Network Rack with caster wheels, no side panels, may be missing a screw down foot or two, no rear doors (need to verify), no keys
May have a shelf or two, and may or may not have cable mgmt bars (depends on the rack)

Originally purchased with a good deal in case my client needed some racks for their office move. Their new space comes with racks so they don't need them now.

- you must pickup and will need a truck as this will not fit in your Prius - garage/loading dock access & freight elevator access will be arranged. I will tell you that we did fit three in the bed of a Ford F150 but needed tie-down straps when we moved all three.

If these are not taken away they will end up as e-waste.
 
Last edited:

itronin

Well-Known Member
Nov 24, 2018
1,233
793
113
Denver, Colorado
Updated 2022/04/12 - all went to e-waste

What - Cisco Routers (see list below)
Status - Available
Location - Denver, CO downtown
Cost - Free
Qty - 2
Expiration - March 15, 2022

Description
As seen in the photos qty 1 Cisco 10700 as configured and qty 1 Cisco 7606-S. I have no idea if the are working now, however when I originally toured the space in December they appeared to be in operation (blinky lights, despite the dust bunnies).

These items were abandoned in place by the previous suite's tenant.

- you must pickup and these items should fit in your Prius or lyft/uber ride but you may have difficulty transporting them using a bicycle that has no trailer. My advice is that you will need a dolly or cart of some kind for the 7606-S.

IMG_4231.jpg IMG_4232.jpg

If these are not taken away they will end up as e-waste.
 
Last edited:

zer0sum

Well-Known Member
Mar 8, 2013
849
473
63
If someone needs a short depth 4U chassis it's all yours :)

I believe this is what I have, but I can't find the original receipt

What - CHENBRO RM42300-F
Status - Available
Location - San Jose, CA
Cost - Free
Qty - 1
Expiration - March 25, 2022
 

BlueFox

Legendary Member Spam Hunter Extraordinaire
Oct 26, 2015
2,063
1,483
113
1 left. No skins no rear doors. can provide a few horizontal cable mgmt rails.
If you don't have any luck here, might look into donating it. Last 48U rack I had wound up with the Red Cross. They even showed up to haul it away.
 
  • Like
Reactions: Samir

Samir

Post Liker and Deal Hunter Extraordinaire!
Jul 21, 2017
3,257
1,447
113
49
HSV and SFO
If someone needs a short depth 4U chassis it's all yours :)

I believe this is what I have, but I can't find the original receipt

What - CHENBRO RM42300-F
Status - Available
Location - San Jose, CA
Cost - Free
Qty - 1
Expiration - March 25, 2022
Still have this?
 

BlueFox

Legendary Member Spam Hunter Extraordinaire
Oct 26, 2015
2,063
1,483
113
Shipping or local pickup in Phoenix.

Dynatron 1U active HSF 775-1151. What to expect (not my listing): Dynatron DB127515BM-A 2 Ball Bearing Top Motor fan active Heatsink DC12V 0.60A | eBay

Standard Intel 775-1151 desktop HSF. Copper core, so should do higher TDP CPUs.

Cooljag 2U active HSF 2011 square. What to expect (again not my listing): Cooljag ITO-D/S-Q (JYC1R04ATPG-0) 2U Cooling Fan w/PWM Blower - Socket LGA 2011 4715910061879 | eBay

Tool-free Icy Dock 2.5" to 3.5" SATA drive adapter

All gone
 
Last edited:
  • Like
Reactions: Samir