Hello,
I have the following hardware :
1. Supermicro motherboard : X9DRi-F
2. CPU : Intel Xeon E5 2670 (QB7A C0 Stepping)
3. RAM : Kingston Technology ValueRAM 64 GB Kit of 4 (4x16 GB Modules) 1600MHz DDR3 (PC3-12800) ECC Reg CL11 DIMM DR x4 Server Memory KVR16R11D4K4/64
I power on the system, the heartbeat led from motherboard is blinking, CPU and power fans are spinning, but I don't hear any beeps, no VGA output, no POST. I can connect through IPMI into motherboard. Tried to boot the system without RAM, the same problem, tired to reset bios, and tired a lot of other tricks nothing helps. Can somebody help me ? Why the system doesn't boot ? Can this be an issue with the CPU because it is a QB7A C0 Stepping ? (the seller from ebay who sold it to me, said that the CPU will work with any dual-cpu motherboard)
Thank you
I have the following hardware :
1. Supermicro motherboard : X9DRi-F
2. CPU : Intel Xeon E5 2670 (QB7A C0 Stepping)
3. RAM : Kingston Technology ValueRAM 64 GB Kit of 4 (4x16 GB Modules) 1600MHz DDR3 (PC3-12800) ECC Reg CL11 DIMM DR x4 Server Memory KVR16R11D4K4/64
I power on the system, the heartbeat led from motherboard is blinking, CPU and power fans are spinning, but I don't hear any beeps, no VGA output, no POST. I can connect through IPMI into motherboard. Tried to boot the system without RAM, the same problem, tired to reset bios, and tired a lot of other tricks nothing helps. Can somebody help me ? Why the system doesn't boot ? Can this be an issue with the CPU because it is a QB7A C0 Stepping ? (the seller from ebay who sold it to me, said that the CPU will work with any dual-cpu motherboard)
Thank you